CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (http://www.cfd-online.com/Forums/openfoam-solving/)
-   -   dieselEngineFoam OpenFOAM-1.6 SigFPE error (http://www.cfd-online.com/Forums/openfoam-solving/68570-dieselenginefoam-openfoam-1-6-sigfpe-error.html)

arun September 24, 2009 04:32

dieselEngineFoam OpenFOAM-1.6 SigFPE error
 
Hi All,

I am simulation the combustion of diesel fuel using kiva mesh in OpenFOAM-1.6 using dieselEngineFoam. The fuel is injected at -30 cad (pilot) and -6 cad (main). Once the simulation reach 3.4 cad the simulation gives floating point exception error.

The error shown below:

#0 Foam::error::printStack(Foam::Ostream&) in "/home/keyzhi/OpenFOAM/OpenFOAM-1.6/lib/linuxGccDPOpt/libOpenFOAM.so"
#1 Foam::sigFpe::sigFpeHandler(int) in "/home/keyzhi/OpenFOAM/OpenFOAM-1.6/lib/linuxGccDPOpt/libOpenFOAM.so"
#2 Uninterpreted:
#3 Foam::ODEChemistryModel<Foam::psiChemistryModel, Foam::sutherlandTransport<Foam::specieThermo<Foam: :janafThermo<Foam::perfectGas> > > >::solve(double, double) in "/home/keyzhi/OpenFOAM/OpenFOAM-1.6/lib/linuxGccDPOpt/libchemistryModel.so"
#4 main in "/home/keyzhi/OpenFOAM/OpenFOAM-1.6/applications/bin/linuxGccDPOpt/dieselEngineFoam"
#5 __libc_start_main in "/lib/tls/i686/cmov/libc.so.6"
#6 _start at /usr/src/packages/BUILD/glibc-2.9/csu/../sysdeps/i386/elf/start.S:122
Floating point exception

I am not really sure what actually cousing this problem.

Thanks in advance.

Arun


All times are GMT -4. The time now is 01:43.