CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (http://www.cfd-online.com/Forums/openfoam-solving/)
-   -   coplanar GGI: static tube and rotating tube (http://www.cfd-online.com/Forums/openfoam-solving/68608-coplanar-ggi-static-tube-rotating-tube.html)

ernsa September 25, 2009 06:17

coplanar GGI: static tube and rotating tube
 
1 Attachment(s)
dear foamers,

i am about to check the functions of GGI in OpenFOAM-1.5-dev - all the tutorials dealing with GGI are working fine. Now i set up a simple testcase: i want to generate a coplanar interface between a static and rotating flow-through tube as illustrated in the attached graphic.

Does a dynamicFvMesh exist supporting this combination? mixerGgiFvMesh is not the right tool for this issue i think ... So far I haven't found any relevant information how to solve this problem.
Any hints would be appreciated!


Thanks in advance.

regards,
sandro

maalan October 10, 2012 07:46

Hi, Sandro!!

Have you finally solved your problem?? I am facing the same problem! hope you could help me!

Best,
Antonio


All times are GMT -4. The time now is 20:58.