Stirling Engine Simulation in OpenFoam

kilovolts · March 4, 2010, 09:43

Does anyone out there have experience simulating constant volume regenerative cycles like the Stirling Cycle in OpenFoam?

Does anyone know if OpenFoam has the capability to simulate such thermodynamic cycles?

timothyja · June 9, 2010, 00:53

Hi there,
I'm also very interested in this concept have, you found any answers?

koobide · September 26, 2018, 12:31

Hi,

I understand that this thread has been quite since 2010, but if either of you had any luck creating an OpenFOAM Stirling cryocooler or engine simulation, I'd be very interested to hear about it. Particularly, the solvers and the boundary conditions used.

kilovolts · August 21, 2020, 14:57

https://core.ac.uk/download/pdf/141690148.pdf

"CFD MODELLING OF A BETA-TYPE STIRLING MACHINE"
published in 2014

March 4, 2010, 09:43	Stirling Engine Simulation in OpenFoam	#1
kilovolts New Member Jon Join Date: Mar 2010 Posts: 3 Rep Power: 16	Does anyone out there have experience simulating constant volume regenerative cycles like the Stirling Cycle in OpenFoam? Does anyone know if OpenFoam has the capability to simulate such thermodynamic cycles?

August 21, 2020, 14:57		#4
kilovolts New Member Jon Join Date: Mar 2010 Posts: 3 Rep Power: 16	https://core.ac.uk/download/pdf/141690148.pdf "CFD MODELLING OF A BETA-TYPE STIRLING MACHINE" published in 2014 francescomarra and koobide like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Simulation elbows example with Openfoam	ronaldo	OpenFOAM	3	August 16, 2009 13:56
64bitrhel5 OF installation instructions	mirko	OpenFOAM Installation	2	August 12, 2008 18:07
simulation oil in combustion engine ?	Berg	FLUENT	0	April 23, 2006 09:25
Engine simulation (seeking help with method to use)	Geoff Rathbun	Main CFD Forum	4	April 13, 1999 14:19
Question concerning about the flow simulation of a fan in an engine room.	ghlee	Main CFD Forum	3	October 21, 1998 07:05

June 9, 2010, 00:53		#2
timothyja New Member Timothy Join Date: Jun 2010 Posts: 1 Rep Power: 0	Hi there, I'm also very interested in this concept have, you found any answers?

September 26, 2018, 12:31		#3
koobide New Member Amin Join Date: Mar 2014 Posts: 1 Rep Power: 0	Hi, I understand that this thread has been quite since 2010, but if either of you had any luck creating an OpenFOAM Stirling cryocooler or engine simulation, I'd be very interested to hear about it. Particularly, the solvers and the boundary conditions used.