CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

flow past abdominal aorta. Complex BC problem.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 5, 2010, 14:30
Default flow past abdominal aorta. Complex BC problem.
  #1
Senior Member
 
Mieszko Młody
Join Date: Mar 2009
Location: POLAND, USA
Posts: 145
Rep Power: 17
ziemowitzima is on a distinguished road
Dear All,
I am solving flow in abdominal aorta. To see my first results please visit and go to the bottom of the page (two last animations):


https://sites.google.com/site/engcalculusev/research


Main problem in this simulation is inlet velocity boundary condition. This boundary condition is space and time varying. It is described by sin function to simulate blood enter to the aorta. But the main problem is the back flow of the blood. It happened for some period of time. The inlet changes to outlet and two outlets becomes inlets
(to see full velocity bc at the inlet visit:
http://www.youtube.com/watch?v=7YrnD39cQYQ
).
In the case you have seen by clicking the above link the inlet bc are simplified (there is no back flow).


Standard bc for velocity at the outlets (exits) is zeroGradient.


And here complications begin. When keeping zeroGradient bc on the outlets during back flow phase errors arise and solution diverge. In my opinion it is caused by vortex structures at the outlets which cause that on some regions of the exit fluid enters the aorta on some others fluid exits (see figure ). With time velocity become larger and larger...
Then solver is trying to keep constant mass flow.
Does anyone have an idea how to solve this problem ?
cross_section_y-plane_vectors_velosity_mag_t=0.2.jpg
ziemowitzima is offline   Reply With Quote

Old   July 26, 2022, 06:12
Default help
  #2
New Member
 
Snappy
Join Date: Jul 2022
Posts: 3
Rep Power: 3
ljrmicroport is on a distinguished road
Dear, have you solved this problem? I met almost the same one.
ljrmicroport is online now   Reply With Quote

Reply

Tags
aorta, time vayring bc

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FLUENT, flow past a circular cylinder Paul Reichl Main CFD Forum 16 December 8, 2012 16:21
Flow not moving - Supersonic/Initial Pressure problem? shankara.2 FLUENT 0 June 9, 2009 21:49
problem when running icoFoam on a complex shape flow field wendywu OpenFOAM 1 May 21, 2009 00:40
good cold flow results but problem with hot flow Rams FLUENT 0 June 20, 2006 01:52
CFX-Post: problem with mass flow Markus CFX 5 February 19, 2005 18:30


All times are GMT -4. The time now is 22:16.