CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

simpleFoam ddt Euler ?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 11, 2010, 06:53
Default simpleFoam ddt Euler ?
  #1
Member
 
Moritz Wied
Join Date: Mar 2010
Location: suttgart, germany
Posts: 35
Rep Power: 16
Mo-ITB is on a distinguished road
Hi Foamers,

i made some funny experiences with simpleFoam. As is switched from piso to simple i forgot to change the ddtScheme from Euler to steadyState in the fvSchemes.

now if i changed the timestep to a very low value (1e-11), i was able to run simpleFoam with a quick convergence and a result that looks very good.

my setup:
- air flow arround ahmed body
- LamBremhorstKE lowRe
- velocity 40 m/s
- polymesh made with ccm+ with 10 surface layers
- k eps bounded

if i use pisoFoam or simpleFoam with ddtScheme steadyState, i have to start with a low velocity and carefully rise it step by step not to diverge with k and epsilon.

with ddtScheme Euler and the timestep 1e-11 (nothing else changed), it converges with bc 40 m/s and initial field 0 m/s without rising step by step.

Does anybody know, if simpleFoam can "officialy" be used for transient calculations or how the ddt term is taken into account?

Maybe this might also help somebody to get a initial field...

bye,
mo
Mo-ITB is offline   Reply With Quote

Old   June 11, 2010, 07:46
Default
  #2
Senior Member
 
Stefan Herbert
Join Date: Dec 2009
Location: Darmstadt, Germany
Posts: 129
Rep Power: 17
herbert is on a distinguished road
Hi Moritz,

all the equations in simpleFoam do not include any ddt-terms. Therefore time scheme is not used at all. But inside the turbulence model it is used. I don't think that your results could be this good, because solving k- and epsilon-equations with such a small time-step (1e-11!) would be like underrelaxation of near zero! Then you won't have any trouble concerning convergence, of course, but on the other hand your results won't change, do they?

In general simpleFoam cannot be used for transient calculations.

Regards,
Stefan
herbert is offline   Reply With Quote

Old   June 12, 2010, 14:36
Default
  #3
Senior Member
 
Alberto Passalacqua
Join Date: Mar 2009
Location: Ames, Iowa, United States
Posts: 1,912
Rep Power: 36
alberto will become famous soon enoughalberto will become famous soon enough
Quote:
Originally Posted by Mo-ITB View Post
Does anybody know, if simpleFoam can "officialy" be used for transient calculations or how the ddt term is taken into account?
No, simpleFoam is a steady-only solver (no ddt in UEqn). If you want a transient or pseudo-transient solver, take a look at pimpleFoam.

Best,
__________________
Alberto Passalacqua

GeekoCFD - A free distribution based on openSUSE 64 bit with CFD tools, including OpenFOAM. Available as in both physical and virtual formats (current status: http://albertopassalacqua.com/?p=1541)
OpenQBMM - An open-source implementation of quadrature-based moment methods.

To obtain more accurate answers, please specify the version of OpenFOAM you are using.
alberto is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Laminar simpleFoam and inviscid simpleFoam herenger OpenFOAM Running, Solving & CFD 7 July 11, 2013 07:27
Naca0012 k-e mpirun gives fpe whereas simpleFoam not Pierpaolo OpenFOAM 1 May 8, 2010 04:08
Blood Flow - Euler Euler Ilias FLUENT 0 January 12, 2009 11:16
euler model CN FLUENT 0 July 4, 2005 17:35
Euler equations? Jan Ramboer Main CFD Forum 2 August 19, 1999 02:58


All times are GMT -4. The time now is 09:17.