Which multiphase solver to use?

nskelly · July 21, 2020, 09:48

Hi,

I'm looking into running some multiphase simulations and have got a little overwhelmed by the different multiphase solvers there are available on OpenFOAM.

I would like to simulate the following:

1. Two phase Euler-Euler
2. Phase 1: Newtonian and Phase 2: Shear-thinning
3. Incompressible, Isothermal
4. LES and URANS (although URANS is not essential)

From the link below, which contains all of the multiphase solvers in OF5, I cannot find the most suitable one.

https://cfd.direct/openfoam/user-gui...13-1000003.5.4

Could anyone suggest the best one to go with? Any help would be great!

bjnieuwboer · August 13, 2020, 05:25

If the fluids are immiscible, the interFoam solver wil be a good start.

If fluids mix, the twoPhaseEulerFoam could be a suitable solver. However, the solver includes heat transfer. This might be unwanted. An old twoPhaseEulerFoam did not have this feature. I think the feature was added around version 2.4. A second option would be to use sedFoam. This is an Euler-Euler approach for sediment transport. Perhaps it is possible to use this with the rheology you want to model.

(Nearly) all the turbulence models work with all the solvers. However, they might not be included in the solver. You can compile them with the solver to include them.

July 21, 2020, 09:48	Which multiphase solver to use?	#1
nskelly Member Nat K Join Date: Oct 2017 Posts: 68 Rep Power: 8	Hi, I'm looking into running some multiphase simulations and have got a little overwhelmed by the different multiphase solvers there are available on OpenFOAM. I would like to simulate the following: 1. Two phase Euler-Euler 2. Phase 1: Newtonian and Phase 2: Shear-thinning 3. Incompressible, Isothermal 4. LES and URANS (although URANS is not essential) From the link below, which contains all of the multiphase solvers in OF5, I cannot find the most suitable one. https://cfd.direct/openfoam/user-gui...13-1000003.5.4 Could anyone suggest the best one to go with? Any help would be great!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hybrid discretisation - blend factor	gcoopermax	CFX	5	September 23, 2016 08:05
RAS turbulence model in multiphase Euler solver for dilute particle laden flows	openfoammaofnepo	OpenFOAM	0	July 4, 2016 17:29
Right multiphase solver	s-rod	OpenFOAM Running, Solving & CFD	0	December 17, 2015 13:31
Working directory via command line	Luiz	CFX	4	March 6, 2011 20:02
temperature equation for one phase in multiphase solver	romant	OpenFOAM Programming & Development	0	April 13, 2010 05:06

August 13, 2020, 05:25		#2
bjnieuwboer Member Bas Nieuwboer Join Date: Mar 2013 Posts: 32 Rep Power: 13	If the fluids are immiscible, the interFoam solver wil be a good start. If fluids mix, the twoPhaseEulerFoam could be a suitable solver. However, the solver includes heat transfer. This might be unwanted. An old twoPhaseEulerFoam did not have this feature. I think the feature was added around version 2.4. A second option would be to use sedFoam. This is an Euler-Euler approach for sediment transport. Perhaps it is possible to use this with the rheology you want to model. (Nearly) all the turbulence models work with all the solvers. However, they might not be included in the solver. You can compile them with the solver to include them.