- **OpenFOAM Running, Solving & CFD**
(*http://www.cfd-online.com/Forums/openfoam-solving/*)

- - **The correction on pressure equation of SIMPLE algorithm in MRFSimpleFOAM solver**
(*http://www.cfd-online.com/Forums/openfoam-solving/81894-correction-pressure-equation-simple-algorithm-mrfsimplefoam-solver.html*)

The correction on pressure equation of SIMPLE algorithm in MRFSimpleFOAM solverHello,
I am studying pressure correction equation in SIMPLE algorithm by OpenFOAM-1.5-dev, and now I encounter a tough problem. So, I need your help. The SIMPLE algorithm I studied is in the solver of MRFSimpleFoam and I want to add a new pressure prediction between the mass conserving pressure correction equation and the application of under-relaxation. Actually, the new pressure is the average pressure evaluated by multidimensional averaging. Thus http://www.cfd-online.com/Forums/mem...e-pressure.jpg……………………………………………………………….….① Where,http://www.cfd-online.com/Forums/mem...reviours-p.jpg is a previous iteration of pressure field. http://www.cfd-online.com/Forums/mem...cture173-p.jpgis computed via pressure equation in SIMPLE of MRFSimpleFOAM. http://www.cfd-online.com/Forums/mem...re166-aver.jpgis evaluated by multidimensional averaging.http://www.cfd-online.com/Forums/mem...1-distance.jpg is the distance between the owner point and neighbor cell centers. http://www.cfd-online.com/Forums/mem...e172-nodes.jpgis the neighbor nodes Then, the new pressure field distribution (http://www.cfd-online.com/Forums/mem...ture174-pm.jpg) is used for correcting pressure and velocity by applying the under-relaxation, and this step is the same as it in SIMPLE . My problem is how to calculate http://www.cfd-online.com/Forums/mem...re166-aver.jpgand represents them in OpenFOAM codes. Thanks! |

All times are GMT -4. The time now is 16:55. |