CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

GGI modeling

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 20, 2010, 07:01
Default GGI modeling
  #1
New Member
 
Shavkat Kholmatov
Join Date: Feb 2010
Posts: 6
Rep Power: 16
shavkat is on a distinguished road
Dear All,

I need to model GGI without any topological change on the interface boundaries. The inetrface is fixed and not sliding.

I found some documentation giving some general advice but I still miss a lot of information on how to setup, what solver is needed etc. Also, what I see is that I can model GGI using OpenFoam 1.5-dev. Can somebody give some hints/samples over this?
Thanks in advance!

regs. Shavkat
shavkat is offline   Reply With Quote

Old   December 21, 2010, 04:46
Default
  #2
Senior Member
 
Hrvoje Jasak
Join Date: Mar 2009
Location: London, England
Posts: 1,904
Rep Power: 33
hjasak will become famous soon enough
It sounds to me like you need a support contract.

Hrv
__________________
Hrvoje Jasak
Providing commercial FOAM/OpenFOAM and CFD Consulting: http://wikki.co.uk
hjasak is offline   Reply With Quote

Old   December 22, 2010, 05:39
Default Hi ,
  #3
New Member
 
Shavkat Kholmatov
Join Date: Feb 2010
Posts: 6
Rep Power: 16
shavkat is on a distinguished road
Yeah, support contract would be certainly best
However, the task is pretty simple, and I have already modelled it but with a coarser mesh. Now I need to interpolate on the denser mesh, and use GGI. Would you be knowing/having any sample ?

regs,
Sh
shavkat is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ggi FabOr OpenFOAM 17 May 9, 2013 11:19
Difference between ggi and overlapGgi? GGI Tips and Tricks? philippose OpenFOAM Running, Solving & CFD 7 January 16, 2013 10:40
GGI in OpenFOAM-1.5-dev philippose OpenFOAM Running, Solving & CFD 14 November 13, 2011 15:55
Problem using GGI besto OpenFOAM 13 October 30, 2010 08:34
Modeling Flow/Saturation/Absorption in Fibers Gene Dougherty Main CFD Forum 0 June 6, 2003 15:49


All times are GMT -4. The time now is 03:04.