ggiCheck functionObject in 1.6-ext

cnsidero · January 25, 2011, 21:52

Does anyone know how to enable to verbose reporting of the GGI information while a case is running? In 1.5-dev this was enabled by putting the following in the case's system/controlDict

functions
(
ggiCheck
{

type ggiCheck;
phi phi;

functionObjectLibs ("libsampling.so");
}
);

I tried it in 1.6-ext but complains that surfaces, forces, sets, forceCoeffs and probes are the only valid functions.

olauer · January 26, 2011, 06:31

Instead of libsampling.so you have to use libcheckFunctionObjects.so, then it should work.

cnsidero · January 26, 2011, 20:03

That was it. Thanks Oliver.

January 25, 2011, 21:52	ggiCheck functionObject in 1.6-ext	#1
cnsidero Senior Member Chris Sideroff Join Date: Mar 2009 Location: Ottawa, ON, CAN Posts: 154 Rep Power: 6	Does anyone know how to enable to verbose reporting of the GGI information while a case is running? In 1.5-dev this was enabled by putting the following in the case's system/controlDict functions ( ggiCheck { type ggiCheck; phi phi; functionObjectLibs ("libsampling.so"); } ); I tried it in 1.6-ext but complains that surfaces, forces, sets, forceCoeffs and probes are the only valid functions.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
k-omega-SST model (OF 1.6) - turbulent flat plate	cboss	OpenFOAM Running, Solving & CFD	23	November 13, 2011 01:28
Process control functionObject	Vetter	OpenFOAM	4	January 14, 2011 10:38
problems in Two Phase flow using twoPhaseEulerFoam with OpenFoam 1.6	raagh77	OpenFOAM Running, Solving & CFD	0	March 6, 2010 05:11
OpenFOAM Version 1.6 Released	opencfd	OpenFOAM Announcements from ESI-OpenCFD	0	July 27, 2009 17:55
GGI function ggiCheck in OF 15dev	louisgag	OpenFOAM Running, Solving & CFD	3	February 3, 2009 20:08

January 26, 2011, 06:31		#2
olauer Member Oliver Lauer Join Date: Mar 2009 Location: Coburg Posts: 37 Rep Power: 6	Instead of libsampling.so you have to use libcheckFunctionObjects.so, then it should work.

January 26, 2011, 20:03		#3
cnsidero Senior Member Chris Sideroff Join Date: Mar 2009 Location: Ottawa, ON, CAN Posts: 154 Rep Power: 6	That was it. Thanks Oliver.