CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (http://www.cfd-online.com/Forums/openfoam-solving/)
-   -   Problem using hRhoThermo (http://www.cfd-online.com/Forums/openfoam-solving/88286-problem-using-hrhothermo.html)

Tarak May 12, 2011 18:57

Problem using hRhoThermo
 
Hii,

For a compressible LES case, using rhoPisoFoam, in the thermophysical properties, I am using

thermoType hRhoThermo<pureMixture<constTransport<specieThermo <hConstThermo<perfectGas>>>>>

But I am getting the following error:

--> FOAM FATAL ERROR:
Unknown basicPsiThermo type hRhoThermo<pureMixture<constTransport<specieThermo <hConstThermo<perfectGas>>>>>

Valid basicPsiThermo types are:

11
(
ePsiThermo<pureMixture<constTransport<specieThermo <eConstThermo<perfectGas>>>>>
ePsiThermo<pureMixture<constTransport<specieThermo <hConstThermo<perfectGas>>>>>
ePsiThermo<pureMixture<sutherlandTransport<specieT hermo<eConstThermo<perfectGas>>>>>
ePsiThermo<pureMixture<sutherlandTransport<specieT hermo<hConstThermo<perfectGas>>>>>
ePsiThermo<pureMixture<sutherlandTransport<specieT hermo<janafThermo<perfectGas>>>>>
hPsiThermo<pureMixture<constTransport<specieThermo <hConstThermo<perfectGas>>>>>
hPsiThermo<pureMixture<sutherlandTransport<specieT hermo<hConstThermo<perfectGas>>>>>
hPsiThermo<pureMixture<sutherlandTransport<specieT hermo<janafThermo<perfectGas>>>>>
hsPsiThermo<pureMixture<constTransport<specieTherm o<hConstThermo<perfectGas>>>>>
hsPsiThermo<pureMixture<sutherlandTransport<specie Thermo<hConstThermo<perfectGas>>>>>
hsPsiThermo<pureMixture<sutherlandTransport<specie Thermo<janafThermo<perfectGas>>>>>
)

can someone please tell why hRhoThermo is not being accepted?

Thanks,
Tarak

dancfd March 6, 2014 22:55

Hello Tarak,

Were you able to resolve this? I am running into the same problem, using OF 2.1.1 rhoCentralFoam.

Thanks,

Dan


All times are GMT -4. The time now is 11:46.