CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (http://www.cfd-online.com/Forums/openfoam-solving/)
-   -   Errorcode I don't understand (dsmcFoam) (http://www.cfd-online.com/Forums/openfoam-solving/91110-errorcode-i-dont-understand-dsmcfoam.html)

gautcho August 1, 2011 04:29

Errorcode I don't understand (dsmcFoam)
 
Hey everybody,

I am using a slightly modified version of dsmcFoam and OpenFOAM-1.7.1 on 4 cores and my simulation crashed with the following error code. I've never had any other stability-problems with the solver on my PC and I don't get too much information out of that error code. Could there be any problem with my hardware? The owner of the PC just told me, that there have been some problems with the stability of the PC because of some RAM-issues.

Error Code:

inlet Ar: 8.15e+22 [2] #0 Foam::error::printStack(Foam::Ostream&) in "/home/jakob/OpenFOAM/OpenFOAM-1.7.x/lib/linux64GccDPOpt/libOpenFOAM.so"
[2] #1 Foam::sigFpe::sigFpeHandler(int) in "/home/jakob/OpenFOAM/OpenFOAM-1.7.x/lib/linux64GccDPOpt/libOpenFOAM.so"
[2] #2 in "/lib64/libc.so.6"
[2] #3
[2] in "/home/jakob/OpenFOAM/OpenFOAM-1.7.x/applications/bin/linux64GccDPOpt/dsmcFoamModMod"
[2] #4
[2] in "/home/jakob/OpenFOAM/OpenFOAM-1.7.x/applications/bin/linux64GccDPOpt/dsmcFoamModMod"
[2] #5 __libc_start_main in "/lib64/libc.so.6"
[2] #6
[2] at /usr/src/packages/BUILD/glibc-2.11.2/csu/../sysdeps/x86_64/elf/start.S:116
[linux-jtrj:24382] *** Process received signal ***
[linux-jtrj:24382] Signal: Floating point exception (8)
[linux-jtrj:24382] Signal code: (-6)
[linux-jtrj:24382] Failing at address: 0x3e900005f3e
[linux-jtrj:24382] [ 0] /lib64/libc.so.6(+0x32a60) [0x7f5c992c2a60]
[linux-jtrj:24382] [ 1] /lib64/libc.so.6(gsignal+0x35) [0x7f5c992c29e5]
[linux-jtrj:24382] [ 2] /lib64/libc.so.6(+0x32a60) [0x7f5c992c2a60]
[linux-jtrj:24382] [ 3] dsmcFoamModMod() [0x42615b]
[linux-jtrj:24382] [ 4] dsmcFoamModMod() [0x41306c]
[linux-jtrj:24382] [ 5] /lib64/libc.so.6(__libc_start_main+0xfd) [0x7f5c992aeb7d]
[linux-jtrj:24382] [ 6] dsmcFoamModMod() [0x40ffd9]
[linux-jtrj:24382] *** End of error message ***
--------------------------------------------------------------------------
mpirun noticed that process rank 2 with PID 24382 on node linux-jtrj exited on signal 8 (Floating point exception).
--------------------------------------------------------------------------


All times are GMT -4. The time now is 01:04.