CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Running, Solving & CFD

MRFInterFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 7, 2011, 19:26
Default MRFInterFoam
  #1
Member
 
Jason Eason
Join Date: Jan 2010
Location: Portage, Michigan
Posts: 44
Rep Power: 7
JulytoNovember is on a distinguished road
I have a co-axial helicopter rotor design, I'm interested in the induced flow or the rotors. Using MRFInterFoam, as a test I have a single rotor in an atmosphere patch. I have changed the density of the phase to liquid to match the phase 1. The atmosphere patch is a cylinder which the rotor inside of the cylinder. The pressure of the rotor always matches the atmosphere, also no flow is induced. I've run my sets and zones utilities, but still having problems. What can I do to define the rotor so to show its static pressure? Thanks.
__________________
Debian Squeeze - OpenFOAM-2.1.x, Paraview-3.12.0
JulytoNovember is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Transient interFoam with MRF jaswi OpenFOAM Running, Solving & CFD 18 October 20, 2011 23:29
MRFInterFoam should go to $(FOAM_APPBIN) 7islands OpenFOAM Bugs 1 August 1, 2010 05:37
MRFInterFoam: Trouble with direction of gravity / Continuity error cannot be removed bengt OpenFOAM Running, Solving & CFD 2 May 28, 2010 14:45


All times are GMT -4. The time now is 00:17.