CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (http://www.cfd-online.com/Forums/openfoam-solving/)
-   -   direct coupling film and bulk flow (http://www.cfd-online.com/Forums/openfoam-solving/94170-direct-coupling-film-bulk-flow.html)

preibie November 8, 2011 04:49

direct coupling film and bulk flow
 
Hallo,

I use the new solver reactingParticleFilmFoam (openFoam 2.0.1) to simulate a thin water Film on a plane. I tried the tutorials from this solver.

One thing I miss is the direct coupling of the film (surface) velocity and film (surface) temperature as a boundary condition for the main flow (bulk flow). :confused:

Has anybody some information about this topic?

thanks Preibie

aerothermal January 14, 2013 16:42

Yes, the OpenFoam 2.1.1 does not have it yet. You should implement it but the classes are not very well documented. Therefore it should add some difficulty to it.


All times are GMT -4. The time now is 01:27.