direct coupling film and bulk flow

preibie · November 8, 2011, 03:49

Hallo,

I use the new solver reactingParticleFilmFoam (openFoam 2.0.1) to simulate a thin water Film on a plane. I tried the tutorials from this solver.

One thing I miss is the direct coupling of the film (surface) velocity and film (surface) temperature as a boundary condition for the main flow (bulk flow).

Has anybody some information about this topic?

thanks Preibie

aerothermal · January 14, 2013, 15:42

Yes, the OpenFoam 2.1.1 does not have it yet. You should implement it but the classes are not very well documented. Therefore it should add some difficulty to it.

November 8, 2011, 03:49	direct coupling film and bulk flow	#1
preibie Member Stefan Join Date: Jun 2009 Posts: 67 Rep Power: 16	Hallo, I use the new solver reactingParticleFilmFoam (openFoam 2.0.1) to simulate a thin water Film on a plane. I tried the tutorials from this solver. One thing I miss is the direct coupling of the film (surface) velocity and film (surface) temperature as a boundary condition for the main flow (bulk flow). Has anybody some information about this topic? thanks Preibie aerothermal likes this.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

January 14, 2013, 15:42		#2
aerothermal Senior Member Guilherme da Silva Join Date: Aug 2010 Location: Sao Paulo - Brazil Posts: 118 Rep Power: 15	Yes, the OpenFoam 2.1.1 does not have it yet. You should implement it but the classes are not very well documented. Therefore it should add some difficulty to it.