|January 10, 2012, 11:45||
what turbulent boundary conditions are needed for simple foam?
Dr Sachin Borse
Join Date: Oct 2011
Location: Pune, Republic of India
Posts: 46Rep Power: 7
what turbulent boundary conditions are needed for simple foam? how to calculate different turbulent boundary conditions?
how to calculate nut, nuTilda and R ?
Please kindly reply.
|January 11, 2012, 06:07||
Join Date: Aug 2009
Location: London, UK
Posts: 368Rep Power: 13
it always depends on what kind of turbulence model you are using. simpleFoam is only the solver for incompressible flow. Therefore, it will work with different turbulence models. Check the different turbulence models that are available under http://www.openfoam.org/docs/user/st...hp#x15-91251r9 and then try the tutorials in simpleFoam. you will see that there are already turbulence models used in the simpleFoam tutorials. start out with those and then move on to more complex turbulence models. you can also check the other tutorials, which sometimes will give different turbulence models you can use.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Domain Imbalance||HMR||CFX||5||October 10, 2016 05:57|
|CFX13 Post Periodic interface||EtaEta||CFX||7||December 8, 2011 18:15|
|Setting turbulent plane poiseuille model to periodic boundary conditions.||QBeast||FLUENT||0||July 17, 2011 10:08|
|Axisymmetrical mesh||Rasmus Gjesing (Gjesing)||OpenFOAM Native Meshers: blockMesh||10||April 2, 2007 14:00|
|Import gmsh msh to Foam||adorean||Open Source Meshers: Gmsh, Netgen, CGNS, ...||24||April 27, 2005 08:19|