PotentialFoam Problems...

thibautsimon1 · January 24, 2012, 19:09

Hi all,
I'm doing a study on a submarine in deep water,
but I have a problem when I star with doing a potentialFoam -writep:
--> FOAM FATAL ERROR:
No valid model for viscous stress calculation.

From function forces::devRhoReff()
in file forces/forces.C at line 113.

FOAM exiting

Is someone have an idea of where it's coming from?

Thanks a lot!!

garrison · April 17, 2012, 07:35

Maybe it's too late for you..
.. it should because of the "force" function in your controlDict, it will use viscous stress to calculate the force..
so just commend it off when using potentialFoam..

rcastilla · June 13, 2014, 04:58

potentialFoam has an option -noFunctionObjects that overrides the function subdictionary of controlDict

Antony_Bosco · November 23, 2015, 10:40

Hello everyone ,

Please let me know how to calculate the total pressure field (= static p + dynamic p) in case of potentialFoam.
i used potentialFoam -writep.

i have a doubt if p is actually p or something else.

Thanks in Advance,
antony

January 24, 2012, 19:09	PotentialFoam Problems...	#1
thibautsimon1 New Member Thibaut SIMON Join Date: Jan 2012 Posts: 5 Rep Power: 14	Hi all, I'm doing a study on a submarine in deep water, but I have a problem when I star with doing a potentialFoam -writep: --> FOAM FATAL ERROR: No valid model for viscous stress calculation. From function forces::devRhoReff() in file forces/forces.C at line 113. FOAM exiting Is someone have an idea of where it's coming from? Thanks a lot!!

June 13, 2014, 04:58		#3
rcastilla Senior Member Robert Castilla Join Date: Apr 2009 Location: Spain Posts: 109 Rep Power: 17	potentialFoam has an option -noFunctionObjects that overrides the function subdictionary of controlDict macRC likes this.

November 23, 2015, 10:40	total pressure	#4
Antony_Bosco New Member Antony Premkumar Join Date: Jul 2015 Posts: 18 Rep Power: 10	Hello everyone , Please let me know how to calculate the total pressure field (= static p + dynamic p) in case of potentialFoam. i used potentialFoam -writep. i have a doubt if p is actually p or something else. Thanks in Advance, antony

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Problems with coedge curves and surfaces	tommymoose	ANSYS Meshing & Geometry	6	December 1, 2020 11:12
Needed Benchmark Problems for FSI	Mechstud	Main CFD Forum	4	July 26, 2011 12:13
PotentialFoam few problems	chris_sev	OpenFOAM Running, Solving & CFD	1	July 22, 2008 10:15
Help required to solve Hydraulic related problems	aero	CFX	0	October 30, 2006 11:00
Some problems with Star CD	Micha	Siemens	0	August 6, 2003 13:55

April 17, 2012, 07:35		#2
garrison New Member Garrison, Liang Join Date: Feb 2012 Posts: 15 Rep Power: 14	Maybe it's too late for you.. .. it should because of the "force" function in your controlDict, it will use viscous stress to calculate the force.. so just commend it off when using potentialFoam..