CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (http://www.cfd-online.com/Forums/openfoam-solving/)
-   -   simpleFoam Foam::error::printStack(Foam::Ostream&)kOmegaSSTCo effs (http://www.cfd-online.com/Forums/openfoam-solving/97713-simplefoam-foam-error-printstack-foam-ostream-komegasstco-effs.html)

Verfblikje February 23, 2012 05:03

simpleFoam Foam::error::printStack(Foam::Ostream&)kOmegaSSTCo effs
 
1 Attachment(s)
Dear forummembers,

I am running a 2D multi-element airfoil simulation using an o-grid. The solver used is simpleFoam and I use the kOmegaSST turbulence model.
I first tried to to this simulation in a square domain, which worked fine. However, since I need do a sweep of angles of attack I switched to a circular domain. I use the inletOutlet boundary condition. Yet, with the new domain I keep getting a printStack error. Searching the forum I did find something. But I am not sure what to do with this information. It says that the problem of the topic starter might be in grad(U_). Does this imply my U should not be a uniform field, because then grad(U_) will be zero? Or should I be looking elsewhere?

Thanks for reading and I hope some one can help.

Nick

P.S. I have attached the contents of the 0 folder to this post.

Code:

Pstream initialized with:
    floatTransfer    : 0
    nProcsSimpleSum  : 0
    commsType        : nonBlocking
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster
allowSystemOperations : Disallowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0

Reading field p

Reading field U

Reading/calculating face flux field phi

Selecting incompressible transport model Newtonian
Selecting RAS turbulence model kOmegaSST
--> Upgrading k to employ run-time selectable wall functions
    Backup original k to k.old
    Writing updated k
--> Upgrading omega to employ run-time selectable wall functions
    Backup original omega to omega.old
    Writing updated omega
--> Creating nut to employ run-time selectable wall functions
    Writing new nut
[2] #0  Foam::error::printStack(Foam::Ostream&)kOmegaSSTCoeffs
{
    alphaK1        0.85034;
    alphaK2        1;
    alphaOmega1    0.5;
    alphaOmega2    0.85616;
    gamma1          0.5532;
    gamma2          0.4403;
    beta1          0.075;
    beta2          0.0828;
    betaStar        0.09;
    a1              0.31;
    c1              10;
}

No field sources present


SIMPLE: convergence criteria
    field p        tolerance 1e-05
    field U        tolerance 1e-05
    field k        tolerance 1e-05
    field omega        tolerance 1e-05


Starting time loop

 in "/opt/openfoam210/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[2] #1  Foam::sigFpe::sigHandler(int) in "/opt/openfoam210/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[2] #2  in "/lib/x86_64-linux-gnu/libc.so.6"
[2] #3  Foam::tmp<Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> > Foam::mag<Foam::SymmTensor<double>, Foam::fvPatchField, Foam::volMesh>(Foam::tmp<Foam::GeometricField<Foam::SymmTensor<double>, Foam::fvPatchField, Foam::volMesh> > const&) in "/opt/openfoam210/platforms/linux64GccDPOpt/lib/libincompressibleRASModels.so"
[2] #4  Foam::incompressible::RASModels::kOmegaSST::kOmegaSST(Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> const&, Foam::transportModel&, Foam::word const&, Foam::word const&) in "/opt/openfoam210/platforms/linux64GccDPOpt/lib/libincompressibleRASModels.so"
[2] #5  Foam::incompressible::RASModel::adddictionaryConstructorToTable<Foam::incompressible::RASModels::kOmegaSST>::New(Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> const&, Foam::transportModel&, Foam::word const&) in "/opt/openfoam210/platforms/linux64GccDPOpt/lib/libincompressibleRASModels.so"
[2] #6  Foam::incompressible::RASModel::New(Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> const&, Foam::transportModel&, Foam::word const&) in "/opt/openfoam210/platforms/linux64GccDPOpt/lib/libincompressibleRASModels.so"
[2] #7 
[2]  in "/opt/openfoam210/platforms/linux64GccDPOpt/bin/simpleFoam"
[2] #8  __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6"
[2] #9 
[2]  in "/opt/openfoam210/platforms/linux64GccDPOpt/bin/simpleFoam"
[cfdworkstation:12006] *** Process received signal ***
[cfdworkstation:12006] Signal: Floating point exception (8)
[cfdworkstation:12006] Signal code:  (-6)
[cfdworkstation:12006] Failing at address: 0x3e800002ee6
[cfdworkstation:12006] [ 0] /lib/x86_64-linux-gnu/libc.so.6(+0x33d80) [0x7f2e1997fd80]
[cfdworkstation:12006] [ 1] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x35) [0x7f2e1997fd05]
[cfdworkstation:12006] [ 2] /lib/x86_64-linux-gnu/libc.so.6(+0x33d80) [0x7f2e1997fd80]
[cfdworkstation:12006] [ 3] /opt/openfoam210/platforms/linux64GccDPOpt/lib/libincompressibleRASModels.so(_ZN4Foam3magINS_10SymmTensorIdEENS_12fvPatchFieldENS_7volMeshEEENS_3tmpINS_14GeometricFieldIdT0_T1_EEEERKNS5_INS6_IT_S7_S8_EEEE+0x169) [0x7f2e1c891929]
[cfdworkstation:12006] [ 4] /opt/openfoam210/platforms/linux64GccDPOpt/lib/libincompressibleRASModels.so(_ZN4Foam14incompressible9RASModels9kOmegaSSTC2ERKNS_14GeometricFieldINS_6VectorIdEENS_12fvPatchFieldENS_7volMeshEEERKNS3_IdNS_13fvsPatchFieldENS_11surfaceMeshEEERNS_14transportModelERKNS_4wordESK_+0xdab) [0x7f2e1c88912b]
[cfdworkstation:12006] [ 5] /opt/openfoam210/platforms/linux64GccDPOpt/lib/libincompressibleRASModels.so(_ZN4Foam14incompressible8RASModel31adddictionaryConstructorToTableINS0_9RASModels9kOmegaSSTEE3NewERKNS_14GeometricFieldINS_6VectorIdEENS_12fvPatchFieldENS_7volMeshEEERKNS6_IdNS_13fvsPatchFieldENS_11surfaceMeshEEERNS_14transportModelERKNS_4wordE+0x58) [0x7f2e1c894608]
[cfdworkstation:12006] [ 6] /opt/openfoam210/platforms/linux64GccDPOpt/lib/libincompressibleRASModels.so(_ZN4Foam14incompressible8RASModel3NewERKNS_14GeometricFieldINS_6VectorIdEENS_12fvPatchFieldENS_7volMeshEEERKNS2_IdNS_13fvsPatchFieldENS_11surfaceMeshEEERNS_14transportModelERKNS_4wordE+0x3f9) [0x7f2e1c80dc19]
[cfdworkstation:12006] [ 7] simpleFoam() [0x419d49]
[cfdworkstation:12006] [ 8] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xff) [0x7f2e1996aeff]
[cfdworkstation:12006] [ 9] simpleFoam() [0x416d09]
[cfdworkstation:12006] *** End of error message ***
--------------------------------------------------------------------------
mpirun noticed that process rank 2 with PID 12006 on node cfdworkstation exited on signal 8 (Floating point exception).
--------------------------------------------------------------------------


Verfblikje February 27, 2012 06:15

No one has any idea?


All times are GMT -4. The time now is 22:09.