CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (http://www.cfd-online.com/Forums/openfoam-solving/)
-   -   SRFSimpleFoam (http://www.cfd-online.com/Forums/openfoam-solving/98104-srfsimplefoam.html)

Astarta March 3, 2012 05:01

SRFSimpleFoam
 
Hello Foamers!

I try to solve my case with SRFSimpleFoam and I`ve faced to this message in terminal:

Time = 0.002487

DILUPBiCG: Solving for Urelx, Initial residual = 0.0362232, Final residual = 0.00297694, No Iterations 2
DILUPBiCG: Solving for Urely, Initial residual = 0.0384163, Final residual = 0.00328704, No Iterations 2
DILUPBiCG: Solving for Urelz, Initial residual = 0.0393373, Final residual = 0.00286376, No Iterations 2
DICPCG: Solving for p, Initial residual = 0.130675, Final residual = 0.00128521, No Iterations 65
time step continuity errors : sum local = 5.57279e+48, global = -1.78965e+48, cumulative = -2.59065e+49
DILUPBiCG: Solving for omega, Initial residual = 0.0371329, Final residual = 0.00183394, No Iterations 2
#0 Foam::error::printStack(Foam::Ostream&) in "/opt/openfoam210/platforms/linuxGccDPOpt/lib/libOpenFOAM.so"
#1 Foam::sigFpe::sigHandler(int) in "/opt/openfoam210/platforms/linuxGccDPOpt/lib/libOpenFOAM.so"
#2 Uninterpreted:
#3 Foam::PBiCG::solve(Foam::Field<double>&, Foam::Field<double> const&, unsigned char) const in "/opt/openfoam210/platforms/linuxGccDPOpt/lib/libOpenFOAM.so"
#4 Foam::fvMatrix<double>::solve(Foam::dictionary const&) in "/opt/openfoam210/platforms/linuxGccDPOpt/lib/libfiniteVolume.so"
#5 Foam::fvMatrix<double>::solve() in "/opt/openfoam210/platforms/linuxGccDPOpt/lib/libincompressibleRASModels.so"
#6 Foam::incompressible::RASModels::kOmegaSST::correc t() in "/opt/openfoam210/platforms/linuxGccDPOpt/lib/libincompressibleRASModels.so"
#7
in "/opt/openfoam210/platforms/linuxGccDPOpt/bin/SRFSimpleFoam"
#8 __libc_start_main in "/lib/i386-linux-gnu/libc.so.6"
#9
in "/opt/openfoam210/platforms/linuxGccDPOpt/bin/SRFSimpleFoam"
Исключение в операции с плавающей точкой

Here`s my case - http://dl.dropbox.com/u/61034590/cas...pleFoam.tar.gz

I don`t know where`s problem
Any help will be apprecaited

Best regards,
Astarta

blake May 24, 2012 19:46

SRFSimpleFoam
 
I think the error may be caused by the initial value of K and omega or you can lower down the relaxation of p。thy。


All times are GMT -4. The time now is 07:53.