OpenFOAM Running, Solving & CFD

User Name Remember Me Password

Read this first: How to ask a question on the forums

Page 218 of 480 « First < 118 168 208 216 217 218 219 220 228 268 318 > Last »

Threads in Forum : OpenFOAM Running, Solving & CFD

Forum Tools

Search this Forum

		Rating Thread / Thread Starter	Last Post	Replies	Views
		adding bottom stress/source term to shallowwaterfoam KUMAR7491	January 2, 2017 04:47 by KUMAR7491	0	705
		codeDict Error Parabolic Power Law Inlet Velocity Profile Sindibad	January 1, 2017 19:53 by Sindibad	0	981
		Wall roughness in simpleFoam Deagle	January 1, 2017 15:05 by tomf	1	1,055
		PODSolver - OF-1.6-ext jnilsson	December 30, 2016 12:45 by ahmet	2	1,453
		Gas permeation into solid: What boundary condition? cstuart	December 30, 2016 08:27 by cstuart	0	712
		Problems running icoFoam: sigSegv with 4x mesh resolution SUBHANKAR	December 29, 2016 22:53 by SUBHANKAR	4	895
		Symmetry boundary condition in a heating pipe albertokarkour	December 29, 2016 12:51 by arvindpj	1	1,111
		Streamwise cyclic with HT - modeling strategy ok? New_Old	December 29, 2016 09:18 by New_Old	0	737
		noSlip boundary condition is violated in chtMultiRegionSimpleFoam sitajeje	December 29, 2016 05:08 by sitajeje	0	769
		Dynamic mesh moving points on two patches with conflicting BCs pbachant	December 28, 2016 09:45 by pbachant	0	831
		laminar flow in one zone and kEpsilon model in the other zone super1	December 28, 2016 08:29 by super1	0	601
		error with rhoSimpleFoam daron	December 28, 2016 07:44 by daron	0	678
		Induction Motor in chtMultiRegionFoam xsa	December 28, 2016 06:16 by xsa	0	994
		How to ensure good cells with dynamic mesh motion? petr.f.	December 27, 2016 11:40 by pbachant	1	1,101
		AxiSym laminar impinging free surface jet Kinrah	December 26, 2016 06:11 by Kinrah	1	1,051
		No pressure drop in twoPhaseEulerFoam pipe with cyclic boundaries rdbisme	December 25, 2016 10:29 by spf521	4	2,024
		parallel run issue for code with structure of chtmultiregionfoam + boussinesqpimplefo manuc	December 24, 2016 03:50 by manuc	0	819
		ABL use of fixed shear stress leads to segmentation fault 11 cristopf	December 23, 2016 16:57 by jiez	1	1,532
		Setting a transient convergence criterion giovannibonino	December 23, 2016 06:17 by giovannibonino	0	886
		solver: for unsteady, laminar, in-compressible with heat transfer srv537	December 22, 2016 09:09 by floquation	4	848
		interCondensatingEvaporatingFoam Prandtl_2	December 22, 2016 07:43 by Prandtl_2	6	3,018
		An example of the LRR turbulence model ? ebtedaei	December 21, 2016 13:26 by ebtedaei	0	677
		Pressure drop over throttle disappears (simpleFoam --> pipe simulation) highpressuretube	December 21, 2016 12:07 by arvindpj	18	1,292
		Change k-e model to RSM(LRR) model ? ebtedaei	December 21, 2016 07:46 by ebtedaei	0	642
		Steady State scalarTransportFoam Problem FlyBob91	December 21, 2016 07:07 by FlyBob91	2	776
		OpenFoam freezing capabilities JohnJohn8	December 21, 2016 04:18 by JohnJohn8	0	949
		NVD Schemes in OpenFOAM 4 kozden	December 21, 2016 02:50 by kozden	0	650
		Cubic scheme and spurious oscillation in velocity. Any alternative? Lorenzo92	December 21, 2016 01:32 by Lorenzo92	0	585
		Slip vs. Symmetry boundary condition Madeleine P. Vincent	December 20, 2016 11:07 by alexeym	2	2,560
		Run OpenFoam in 2 nodes of a cluster WhiteW	December 20, 2016 00:51 by j-avdeev	16	8,504
		interFoam: Courant number explodes and no convergence DancingButterfly	December 19, 2016 19:14 by DancingButterfly	4	1,381
		Recirculation bubble stretching in laminar reacting flow simulation in reactingFoam sahmed	December 19, 2016 10:35 by sahmed	2	1,185
		wallFilm-solver: explicit or implicit? fsch1	December 19, 2016 04:05 by fsch1	0	840
		Airfoil 2D cfd simulation Cocorito90	December 19, 2016 03:43 by sajad69	14	3,376
		XiFoam Solverrestart Problem Polli	December 19, 2016 03:32 by Polli	0	716
		Temperature in icoFoam mgab	December 17, 2016 17:55 by mgab	1	1,318
		SprayFoam data file in Openfoam Adri54	December 17, 2016 12:19 by Adri54	0	841
		Need Help in generating Lift and Drag coefficients over airfoil (2D) jingow	December 17, 2016 11:34 by jingow	2	1,428
		Add extra body force (e.g. gravity) in simpleFoam: cavity example juchess	December 17, 2016 07:19 by jherb	6	8,286
		Axisymmetric actuator disk simpleFoam! CFD-Lover	December 16, 2016 15:14 by CFD-Lover	0	634

Read this first: How to ask a question on the forums

Page 218 of 480 « First < 118 168 208 216 217 218 219 220 228 268 318 > Last »

Display Options

Showing threads 8681 to 8720 of 19170

Sorted By Thread Title Last Post Time Thread Start Time Number of Replies Number of Views Thread Starter Thread Rating Sort Order Ascending Descending From The Last Day Last 2 Days Last Week Last 10 Days Last 2 Weeks Last Month Last 45 Days Last 2 Months Last 75 Days Last 100 Days Last Year Beginning

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules