CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   Weller paper + VOF (http://www.cfd-online.com/Forums/openfoam/103282-weller-paper-vof.html)

nimasam June 15, 2012 13:44

Weller paper + VOF
 
Hi dear foamer
has any body access to this paper?
"A new approach to VOF-based interface capturing methods for incompressible and compressible flow"

can you share it please?


Best Regards

wyldckat June 16, 2012 07:40

Greetings Nima,

According to what I searched, you probably have to use the contact form: http://www.openfoam.com/contact/ - because that paper seems to be an internal paper of theirs.

Best regards,
Bruno

elvis June 18, 2012 09:03

Have you seen http://powerlab.fsb.hr/ped/kturbo/Op...oUbbinkPhD.pdf
(I hope that it) goes in the same direction as VOF is heavily used in that text

Modeling high viscosity slag flows in entrained flow gasifiers using a Volume of Fluid (VOF) approach,Konrad Uebel (TU Bergakademie Freiberg)

you find lots of VOF in OF workshop presentations

alvariten June 28, 2015 14:19

Quote:

Hi dear foamer
has any body access to this paper?
"A new approach to VOF-based interface capturing methods for incompressible and compressible flow"

can you share it please?


Best Regards
Hi Nima,

I am also interested in the paper "A new approach to trapping methods VOF based interface for incompressible and compressible flow".
Did you finally get it? Could you share it? or tell me where I can get it?

Regards.

Frenk_T November 20, 2015 06:38

Quote:

Originally Posted by alvariten (Post 552453)
Hi Nima,

I am also interested in the paper "A new approach to trapping methods VOF based interface for incompressible and compressible flow".
Did you finally get it? Could you share it? or tell me where I can get it?

Regards.

I would also be interested in the paper. News about it?

Regards,
Francesco

Cyp November 25, 2015 21:36

Hi all,

This is not the paper by Weller but my own derivation of the VOF equation VOF with mass transfer . If you want incompressible VOF without phase change, just set \dot{m} =0.

Cheers,
Cyprien


All times are GMT -4. The time now is 15:22.