CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   Run-time Post-processing OpenFoam 1.4.1 (http://www.cfd-online.com/Forums/openfoam/105271-run-time-post-processing-openfoam-1-4-1-a.html)

Franck Rub July 26, 2012 12:09

Run-time Post-processing OpenFoam 1.4.1
 
Dear all,

I have just started to use OpenFoam 1.4.1 and I have to use Run-time Post-processing functions.

More precisely I have to use the "SampligLine" function.

But, I have tried and I have this error message:

************************************************** *******

--> FOAM FATAL ERROR : Unknown functiont type samplingLine

Valid functions are :

1
(
probes
)

************************************************** ******

I guess that the "SampligLine" function is not activated, so I tried to do that in /OpenFOAM/OpenFOAM-1.4.1/src/sampling/ by typing wmake.

It does not work... Does somebody have an idea of what I can do to solve my problem?

Thank you very much

Regards

Franck

wyldckat July 26, 2012 16:48

Greetings Franck and welcome to the forum!

OpenFOAM 1.4.1? The latest is OpenFOAM 2.1.1! Any reason in particular why you're using such an old version?

Either way, since I don't have an OpenFOAM 1.4.1 build handy, here's a few tips:
Best regards,
Bruno

Franck Rub July 30, 2012 06:19

Hello Bruno,

yes I known that it is an old version, but I have to use OpenFoam 1.4.1 ...

Thank you very much for your links, I am going to have a look at these and I hope it would help me to solve my problem!

Regards,

Franck


All times are GMT -4. The time now is 00:07.