|
[Sponsors] |
September 26, 2012, 10:49 |
openfoam queries
|
#1 |
New Member
mark
Join Date: Sep 2012
Posts: 9
Rep Power: 12 |
Dear friends,
This is my first post in open foam, i am interesting to learn open foam, i know commercial software Ansys, and how open foam is useful when compared to Ansys software, when it is really worthy to learn OF, because its hard to find user guide, only basic is there, please give me your suggestions. i am doing M tech in aerospace Eng. |
|
September 27, 2012, 06:29 |
open foam quries
|
#2 |
New Member
mark
Join Date: Sep 2012
Posts: 9
Rep Power: 12 |
dear friends,
i am interesting doing flapping wing analysis using open foam, for that i consider points on the model and extract the xyz coordinates of my model,the file format is in .csa file. For pre processing how i will start, how i import the coordinates, please guide me |
|
September 27, 2012, 06:45 |
|
#3 |
Senior Member
Daniel P. Combest
Join Date: Mar 2009
Location: St. Louis, USA
Posts: 621
Rep Power: 0 |
Welcome!
You might want to check out some of the previous posts on the subject http://www.cfd-online.com/Forums/ope...-new-user.html is a good place to start. Also, if you have funding or are willing to pay out of your own pocket, you can go to the workshop and attend the training sessions. You can also try to attend the summer school that is offered every year http://www.cfd-online.com/Forums/ope...ol-2012-a.html The best advise is to just get in there and get using OpenFOAM. There are plenty of cases and tutorials to get started; the forum is full of information on best practices; and there are plenty of people to answer questions and discuss the topic if you are patient. Good luck. |
|
September 28, 2012, 03:00 |
open foam
|
#4 |
New Member
mark
Join Date: Sep 2012
Posts: 9
Rep Power: 12 |
thanks chegdan, for your kind response, i learn how to import cad stl format in OF by seeing discussion on OF, but i dont know how i import xyz coordinates of my model , my model is not cad diagram, i have only xyz coordinates, i don't want to import in any cad software, and get model, because here flapping wing is flexible,twisting, because of that i mark the points on the model( i consider 20 points on my model by florescent ink) and extract the xyz coordinates of the my model, please help me
|
|
September 28, 2012, 03:58 |
|
#5 |
Senior Member
|
Hi,
For flexible flapping wing I would advice you to read the PHD-Thesis from Frank Bos Moving and deforming meshes for flapping flight at low Reynolds numbers RBF is now included in OF1.6-extend, do not search for RBF in OF2.1.x or OF2.0.x it is not included there. For pointdata in x,y,z http://vtk.org/gitweb?p=VTKData.git;a=blob;f=Baseline/Imaging/reconstructSurface.png you could use http://www.vtk.org/doc/release/5.10/...ionFilter.html modify the python example http://vtk.org/gitweb?p=VTK.git;a=bl...ructSurface.py to create a STL-file or OBJ-file or so, but maybe a better solution is to work with based on blender => SwiftBlock Last edited by elvis; September 28, 2012 at 04:35. |
|
September 28, 2012, 08:03 |
open foam quries
|
#6 |
New Member
mark
Join Date: Sep 2012
Posts: 9
Rep Power: 12 |
thanks elvis, for your kind help, i am using OF 2.1, i dont know blender and python, its necessary for my project? Early i work on ansys for my flapping project, before i change to OF2.1
I think OF-1.5-dev and OF 1.6 extend is same(ie extend version of OF-1.5-dev) how i install OF 1.6 extend? please give me link for that by MARK |
|
September 30, 2012, 02:16 |
|
#7 |
Senior Member
|
Hi
you will find installation guide for various distributions You can have more than one OF installation side by side if you manage your .bashrc right. And no you do not need blender or python, although there is some interesting python stuff that is usually worth to have a look => groovyBC swak4Foam funkySetFields pythonFlu Last edited by elvis; September 30, 2012 at 02:31. |
|
October 1, 2012, 05:21 |
|
#8 |
New Member
mark
Join Date: Sep 2012
Posts: 9
Rep Power: 12 |
thanks elvis, links are really useful for me, i install OF 1.6 ext
if u don't mind, u please explain me with simple example of these three, sorry for this, i can't understand properly 1.groovyBC 2.swak4Foam 3.funkySetFields Last edited by mrk; October 1, 2012 at 05:22. Reason: nothing |
|
October 1, 2012, 10:06 |
|
#9 |
Senior Member
|
Hi,
just wanted to mention useful tools that give you first class access to non-uniform initial-conditions, s. th. that can be tricky the usual way with standard tools. |
|
October 3, 2012, 03:56 |
|
#10 |
New Member
mark
Join Date: Sep 2012
Posts: 9
Rep Power: 12 |
thanks a lot elvis
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Critical errors during OpenFoam installation in OpenSuse 11.0 | amscosta | OpenFOAM | 5 | May 1, 2009 14:06 |
Problem installing OpenFOAM 1.5 installation on RHEL 4. | vwsj84 | OpenFOAM Installation | 4 | April 23, 2009 04:48 |
2009 OpenFOAM Summer School in Zagreb, Croatia | hjasak | OpenFOAM Announcements from Other Sources | 0 | March 27, 2009 12:08 |
64bitrhel5 OF installation instructions | mirko | OpenFOAM Installation | 2 | August 12, 2008 18:07 |
Getting OpenFOAM to coexist with an existing JAVA VM | nik777 | OpenFOAM Installation | 5 | February 22, 2007 07:21 |