CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM (https://www.cfd-online.com/Forums/openfoam/)
-   -   rhoeqn is not calculating in rhoCentralFoam (https://www.cfd-online.com/Forums/openfoam/109980-rhoeqn-not-calculating-rhocentralfoam.html)

Farshad_Noravesh December 2, 2012 06:35
rhoeqn is not calculating in rhoCentralFoam
 
1 Attachment(s)
Hi,

I have a problem to run a NACA0012 at mach=0.8 using rhoCentralFoam.

I have attached my case. The problem is that the rho and rhoUx and rhoUy are not changing and the residual is always zero.

Thanks for help

Farshad

nimasam December 3, 2012 03:45
check your upload test case ;) it seems you upload wrong test case

Onur Koç December 15, 2020 04:53
Same problem
 
Quote:
Originally Posted by Farshad_Noravesh (Post 395265)
Hi,

I have a problem to run a NACA0012 at mach=0.8 using rhoCentralFoam.

I have attached my case. The problem is that the rho and rhoUx and rhoUy are not changing and the residual is always zero.

Thanks for help

Farshad



hi,I am also same problem.Did you find the solution ?


All times are GMT -4. The time now is 15:04.