what means?word::stripInvalid() called for word r For debug level (= 2) > 1

immortality · December 3, 2012, 17:17

Mean and max Courant Numbers = 0.0995124 0.209916
deltaT = 4.7619e-08
Time = 4.7619e-08

diagonal: Solving for rho, Initial residual = 0, Final residual = 0, No Iterations 0
diagonal: Solving for rhoUx, Initial residual = 0, Final residual = 0, No Iterations 0
diagonal: Solving for rhoUy, Initial residual = 0, Final residual = 0, No Iterations 0
swak4Foam: Allocating new repository for sampledGlobalVariables
smoothSolver: Solving for Ux, Initial residual = 2.37033e-06, Final residual = 2.45847e-17, No Iterations 3
smoothSolver: Solving for Uy, Initial residual = 1, Final residual = 1.45241e-16, No Iterations 3
diagonal: Solving for rhoE, Initial residual = 0, Final residual = 0, No Iterations 0
smoothSolver: Solving for e, Initial residual = 2.05419e-06, Final residual = 4.50787e-11, No Iterations 3
word::stripInvalid() called for word r
For debug level (= 2) > 1 this is considered fatal
Aborted

Engr.RZA · December 4, 2012, 11:18

Hi Ehsun

What is your problem type, model setup and solver?

I think u should check ur model setup thoroughly if this error is coming before starting of iterations. If its appearing after some iterations then u can play with the relaxation parameters or check the quality of ur grid.

Good Luck

December 3, 2012, 17:17	what means?word::stripInvalid() called for word r For debug level (= 2) > 1	#1
immortality Senior Member Ehsan Join Date: Oct 2012 Location: Iran Posts: 2,208 Rep Power: 26	Mean and max Courant Numbers = 0.0995124 0.209916 deltaT = 4.7619e-08 Time = 4.7619e-08 diagonal: Solving for rho, Initial residual = 0, Final residual = 0, No Iterations 0 diagonal: Solving for rhoUx, Initial residual = 0, Final residual = 0, No Iterations 0 diagonal: Solving for rhoUy, Initial residual = 0, Final residual = 0, No Iterations 0 swak4Foam: Allocating new repository for sampledGlobalVariables smoothSolver: Solving for Ux, Initial residual = 2.37033e-06, Final residual = 2.45847e-17, No Iterations 3 smoothSolver: Solving for Uy, Initial residual = 1, Final residual = 1.45241e-16, No Iterations 3 diagonal: Solving for rhoE, Initial residual = 0, Final residual = 0, No Iterations 0 smoothSolver: Solving for e, Initial residual = 2.05419e-06, Final residual = 4.50787e-11, No Iterations 3 word::stripInvalid() called for word r For debug level (= 2) > 1 this is considered fatal Aborted

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
reconstructPar --> fileName::stripInvalid() called for invalid fileName commandtouse	adona058	OpenFOAM Bugs	34	December 8, 2022 21:27
under-relaxation factors -> level of residuals	Zigainer	FLUENT	19	July 21, 2017 16:53
[snappyHexMesh] Adding layers goes wrong with SnappyHexMesh	Elise	OpenFOAM Meshing & Mesh Conversion	1	April 22, 2013 02:32
[snappyHexMesh] Boundary layer in a pipe	Clementhuon	OpenFOAM Meshing & Mesh Conversion	6	March 12, 2012 12:41
reconstructParMesh not working with an axisymetric case	francesco	OpenFOAM Bugs	4	May 8, 2009 05:49

December 4, 2012, 11:18		#2
Engr.RZA New Member RZA Join Date: Nov 2012 Posts: 25 Rep Power: 13	Hi Ehsun What is your problem type, model setup and solver? I think u should check ur model setup thoroughly if this error is coming before starting of iterations. If its appearing after some iterations then u can play with the relaxation parameters or check the quality of ur grid. Good Luck