CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM

Is OpenFOAM right software for whrilpool simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By elvis

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 1, 2012, 22:57
Default Is OpenFOAM right software for whrilpool simulation
  #1
New Member
 
Darryl
Join Date: Dec 2012
Posts: 4
Rep Power: 13
dcarden is on a distinguished road
I'm a complete beginner at engineering or CAD software. I'm looking for something that could be used to model whirlpools, and wondering if this would be the right software for the job.

On an episode of Mythbusters, they built a whirlpool simulator using a large water tank with a drain out the bottom. They then hooked up a large water pump to the outlet hose of the bottom of the tank, and pumped the water bank into the tank through the open top.
http://www.youtube.com/watch?v=yYsPyguu7cc

I'm looking for a software to model this type of setup. I'd like to be able to change up the water inlet, drain properties, tank size and shape and so on to model the affect on the whirlpool.

Before I spend a lot of time going through the tutorials and manuals and such to learn the software I thought I ask the community first if I'm on the right track. I'd appreciate any feedback on if this is an appropriate software to use for this purpose, as well as any pointers or advice on getting started for this specific purpose. Suggestions on other, preferably open source or otherwise reasonably priced software packages that might be more appropriate would also be appreciated if OpenFOAM is not the right (or best/easiest to learn) tool for the job.

Thanks
dcarden is offline   Reply With Quote

Old   December 2, 2012, 15:06
Default
  #2
Member
 
Arnout
Join Date: Nov 2010
Posts: 46
Rep Power: 15
The King is on a distinguished road
Yes, you can. But the question is what do you want to calculate? The software will provide you a lot of detailles, water level, velocity/pressure/turbulence on all points in your model. One of the first tutorials is a dambreak, use that as a start-point for your simuation. Succes!
The King is offline   Reply With Quote

Old   December 2, 2012, 23:54
Default
  #3
New Member
 
Darryl
Join Date: Dec 2012
Posts: 4
Rep Power: 13
dcarden is on a distinguished road
I'm not looking to calculate anything, as such. More that I'd like to be able to visually model the "whirlpool machine". It's a kind of water fountain, visual art, "sculpture" type of idea that I have that I'm looking for a way to model in a simulation type environment before starting on real world prototypes.
dcarden is offline   Reply With Quote

Old   December 3, 2012, 14:14
Default
  #4
Senior Member
 
Elvis
Join Date: Mar 2009
Location: Sindelfingen, Germany
Posts: 620
Blog Entries: 6
Rep Power: 24
elvis will become famous soon enough
Hi,

principly OF is capable of simulating your whirlpool with fountains etc.
But it is quite challenging to get to such a level and the learning curve is quite steep.

If you want to design and visulise your whirlpool you might be happier with blender.
http://www.blenderguru.com/videos/in...uid-simulator/
http://wiki.blender.org/index.php/Do.../Physics/Fluid
blender's fluid sim tool uses LBM-method => http://elbeem.sourceforge.net/

Usability of Blender and elbeem is much better than OF. But real world physics are much better modeled with OF, but at the cost of a much steeper learning curve.

If you are not afraid to learn program a solver in OF for your whirlpool sim, take a look at helyx OS as a GUI-tool to mesh your whirlpool.

Or if take a look at SwiftBlock
SwiftSnap for other free GUI meshing tools, but that is only the meshing, you need to program your solver
kwardle likes this.
elvis is offline   Reply With Quote

Old   December 5, 2012, 00:05
Default
  #5
New Member
 
Darryl
Join Date: Dec 2012
Posts: 4
Rep Power: 13
dcarden is on a distinguished road
Thank you for the suggestions. I'm going to take a closer look at Blender. From that tutorial video, it looks like it may be what I'm looking for.
dcarden is offline   Reply With Quote

Old   December 7, 2012, 12:43
Default
  #6
Senior Member
 
Kent Wardle
Join Date: Mar 2009
Location: Illinois, USA
Posts: 219
Rep Power: 21
kwardle is on a distinguished road
I agree with Elvis, if you are just looking for something that looks like a whirlpool visually and do not care about the quantitative accuracy, then Blender's fluid simulation module is the way to go. There will be a learning curve there too, but there are good tutorials to get you started.
-Kent
kwardle is offline   Reply With Quote

Old   December 8, 2012, 00:15
Default
  #7
New Member
 
Darryl
Join Date: Dec 2012
Posts: 4
Rep Power: 13
dcarden is on a distinguished road
If by quantitative accuracy you mean getting accurate "real world physics" type water flow, then I have to go back to wondering if Blender would be the right platform.

I found a better example of what I'm looking to try and make (though I'd be going the opposite direction with the water flow)

http://blog.makezine.com/2010/10/06/whirlpool-fountain/

Since I'd likely be also using acrylic or something similar, having to retool, mold, and cast to make tweaks to the shape to try and get the whirlpool looking the way I like would like could be a bit tedious. So part of what I'm looking for is to be able to get as close to accurate a model of how things are going to look through simulation.
dcarden is offline   Reply With Quote

Old   December 10, 2012, 04:12
Default
  #8
Senior Member
 
Elvis
Join Date: Mar 2009
Location: Sindelfingen, Germany
Posts: 620
Blog Entries: 6
Rep Power: 24
elvis will become famous soon enough
Hi,

Lattice Bolzmann Method (LBM) (like that what is used in Blender) is known to be not as accruate as Finite Volume Method (FVM), but many can live with that, because the method is faster from the calculation speed and the the demand of the computational power is lower.

BMW for example is a big LBM-user (Powerflow) for their CFD-simulations, but I saw one of their CFD-engineers (back in 2007) from "BMW-Sauber F1-Racing" (that raceing-division is not existing anymore) at 2nd OpenFOAM-workshop 2007 in Zagreb ;-)! When it comes to the last digits FVM rules.

If I were you I would give Blender a try, much more user manuals and so on! And your results can be beautyfully rendered within Blender!
elvis is offline   Reply With Quote

Old   December 10, 2012, 14:55
Default
  #9
Senior Member
 
mturcios777's Avatar
 
Marco A. Turcios
Join Date: Mar 2009
Location: Vancouver, BC, Canada
Posts: 740
Rep Power: 28
mturcios777 will become famous soon enough
We had a guy from Exa talk to us about Powerflow. Seemed like an interesting tool, but its not very good for us because of the Mach number limitation (can't do much for Ma > 0.4).
mturcios777 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stirling Engine Simulation in OpenFoam kilovolts OpenFOAM Running, Solving & CFD 3 August 21, 2020 15:57
Binary Fluidization simulation with openfoam. pramod308k OpenFOAM Post-Processing 0 November 5, 2011 05:35
New OpenFOAM Forum Structure jola OpenFOAM 2 October 19, 2011 07:55
which software best for simulation of propulsion hanman CFX 4 August 27, 2008 14:29
Which CFD software can solve this simulation accurately? Amilcar R Arvelo Main CFD Forum 1 December 1, 1998 16:55


All times are GMT -4. The time now is 05:09.