CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   mesh generation and case run in parallel with different solver (http://www.cfd-online.com/Forums/openfoam/110284-mesh-generation-case-run-parallel-different-solver.html)

burt December 7, 2012 02:21

mesh generation and case run in parallel with different solver
 
1 Attachment(s)
My case can be separated into two parts,A and B. an interface is supposed to be arranged between them. Will professional guys teach me how to set mesh A calculated in processor 0 and mesh B in processor 1. data exchange through interface? whether it is possible that part A be calculated by potentialFoam and part B by ras model. If not, can I solve it with different k and epsilon value in two parts when adopting k-epsilon model?

Any advise is appreciated, and any words from you is kind of encouragement for me!
Attachment 17498


All times are GMT -4. The time now is 04:42.