 |
 |
 |
|
|
|
[Sponsors] | ||||
mesh generation and case run in parallel with different solver |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 7, 2012, 01:21
|
mesh generation and case run in parallel with different solver
|
#1 |
|
New Member
Join Date: Dec 2012
Posts: 9
Rep Power: 13  |
My case can be separated into two parts,A and B. an interface is supposed to be arranged between them. Will professional guys teach me how to set mesh A calculated in processor 0 and mesh B in processor 1. data exchange through interface? whether it is possible that part A be calculated by potentialFoam and part B by ras model. If not, can I solve it with different k and epsilon value in two parts when adopting k-epsilon model?
Any advise is appreciated, and any words from you is kind of encouragement for me! ???.JPG |
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Is Playstation 3 cluster suitable for CFD work | hsieh | OpenFOAM | 9 | August 16, 2015 14:53 |
| [Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 03:52 |
| ATTENTION! Reliability problems in CFX 5.7 | Joseph | CFX | 14 | April 20, 2010 15:45 |
| [Commercial meshers] Mesh Generation and Case Set up | Vatant (Vatant) | OpenFOAM Meshing & Mesh Conversion | 6 | March 12, 2009 03:20 |
| [snappyHexMesh] SnappyHexMesh not generate mesh first time | mavimo | OpenFOAM Meshing & Mesh Conversion | 4 | August 26, 2008 07:08 |
Linear Mode
