CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   How to set a right initial conditions for a wall-jet flow case using rhoPimpleFoam (http://www.cfd-online.com/Forums/openfoam/111372-how-set-right-initial-conditions-wall-jet-flow-case-using-rhopimplefoam.html)

Sunxing January 5, 2013 05:02

How to set a right initial conditions for a wall-jet flow case using rhoPimpleFoam
 
Hi Foamers,

I am simulating a wall-jet flow case using the LaunderSharmaKE model(RANS) with the rhoPimpleFoam solver. In the case, I know exactly the inlet velocity, so I set the inlet velocity as fixed value. However, I don't know how to set the outlet velocity and the inlet/outlet condition for the pressure. Can anybody give me a hint?

Regards

Sunxing


All times are GMT -4. The time now is 21:10.