CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM

gradSchems specification

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 20, 2013, 11:25
Default gradSchems specification
  #1
New Member
 
Lorenzo A. Ricciardi
Join Date: Mar 2011
Posts: 27
Rep Power: 6
lichmaster is on a distinguished road
Hi all,

I have a rather "elementary" question: how exactly does gradSchemes specification works?

I need to limit the gradient inside each cell in a fashion similar to the Minmod limiter.

Lurking on this forum I found the cellMDLimitGrad strategy, which has to be coupled with a limiting scheme (Minmod in my case).
On the same post, i found a line like this

gradSchemes
{
default Gauss linear cellMDLimitedGrad Gauss linear 1;
}

What does it mean? Why is Gauss linear repeated 2 times?
Is it possible to limit the gradient inside each cell so that it has the min abs value of each neighbouring cell, using a standard function, or do I have to code it from scratch?

Thanks
lichmaster is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Server specification csmistry Hardware 1 June 9, 2011 01:28
Running rhoCentralFoam without specification of Temperature shangzung OpenFOAM Running, Solving & CFD 1 September 17, 2010 08:52
Turbulence Specification Method for pressure outle co2 FLUENT 0 April 28, 2004 19:32
Workstation specification M. Sau FLUENT 1 October 29, 2003 13:03
.pdf file specification Viatchjeslav V. Anissimov FLUENT 0 October 29, 2003 10:09


All times are GMT -4. The time now is 23:08.