OpenFOAM for Wind Engineering applications

adilrasheedonline · October 24, 2012, 05:34

Hi all,

I have been using my own codes for simulating air flow in complex terrains. However, I am now seriously considering a switch to OpenFoam as it will allow me to investigate more complex cases. I am curious to know if I could find people working in similar fields. Life will be so much easier then. I am at the moment planning to set up cases for the Bolund and Askerveien hill. Anyone already working on similar problems or interested to work with me in future ?

adil

hananfoam · October 28, 2012, 07:23

Hi adil,

I am working on this very issue, complex terrain atmospheric boundary layer flow simulation with OpenFOAM. You can look at the openfoamwiki at the sig group wind energy which i am trying to organize (not very efficiently though). There is also a conference this march in Germany on OpenFOAM and wind energy.

would love to discuss working on these issues together. I'm struggling in making the transitions from DEM data to mesh as code driven rather then gui driven (using SAGA-gis at the moment) for instance, using the Bolund case data for this.

Hanan.

ashvinc9 · March 31, 2013, 20:15

Hi Adil,
Do you still work with Bolund hill case? From last few months, I have started working on large eddy simulation for Bolund hill flow. It would be nice to discuss/share the informations regarding the Bolund case. Have you done any simulation for Bolund hill case?

JR22 · April 2, 2013, 10:57

I am new to OpenFoam and I am also undusting my knowledge of turbulence modeling while I am at it. Would love to be a part of any working group that develops here, and will likely turn into a contributor in the future.

October 24, 2012, 05:34	OpenFOAM for Wind Engineering applications	#1
adilrasheedonline New Member Adil Rasheed Join Date: Sep 2010 Posts: 1 Rep Power: 0	Hi all, I have been using my own codes for simulating air flow in complex terrains. However, I am now seriously considering a switch to OpenFoam as it will allow me to investigate more complex cases. I am curious to know if I could find people working in similar fields. Life will be so much easier then. I am at the moment planning to set up cases for the Bolund and Askerveien hill. Anyone already working on similar problems or interested to work with me in future ? adil imano likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFOAM (IHFOAM) training for coastal engineering	Phicau	OpenFOAM Announcements from Other Sources	5	August 22, 2012 08:47
CFD applications in Petroleum Engineering	yemi	Main CFD Forum	2	January 1, 2012 13:48
Cross-compiling OpenFOAM 1.6 on Linux for Windows 32 and 64bits with Mingw-w64	wyldckat	OpenFOAM Announcements from Other Sources	7	January 19, 2010 15:39
Adventure of fisrst openfoam installation on Ubuntu 710	jussi	OpenFOAM Installation	0	April 24, 2008 14:25
CFD Applications in Environmental Engineering	Andy	Main CFD Forum	3	March 29, 1999 01:25

October 28, 2012, 07:23		#2
hananfoam New Member Hanan Einav-Levy Join Date: May 2011 Posts: 10 Rep Power: 14	Hi adil, I am working on this very issue, complex terrain atmospheric boundary layer flow simulation with OpenFOAM. You can look at the openfoamwiki at the sig group wind energy which i am trying to organize (not very efficiently though). There is also a conference this march in Germany on OpenFOAM and wind energy. would love to discuss working on these issues together. I'm struggling in making the transitions from DEM data to mesh as code driven rather then gui driven (using SAGA-gis at the moment) for instance, using the Bolund case data for this. Hanan.

March 31, 2013, 20:15		#3
ashvinc9 New Member Ashvin Chaudhari Join Date: Aug 2011 Location: Finland Posts: 23 Rep Power: 14	Hi Adil, Do you still work with Bolund hill case? From last few months, I have started working on large eddy simulation for Bolund hill flow. It would be nice to discuss/share the informations regarding the Bolund case. Have you done any simulation for Bolund hill case?

April 2, 2013, 10:57		#4
JR22 Senior Member Jose Rey Join Date: Oct 2012 Posts: 134 Rep Power: 17	I am new to OpenFoam and I am also undusting my knowledge of turbulence modeling while I am at it. Would love to be a part of any working group that develops here, and will likely turn into a contributor in the future.