CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM

Motion continuity errors

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 6, 2013, 04:11
Default Motion continuity errors
  #1
Senior Member
 
Sasan Ghomi
Join Date: Sep 2012
Location: Iran - Tehran
Posts: 185
Rep Power: 4
sasanghomi is on a distinguished road
Hi foamers ,

Do you know anything about origin of Motion continuity errors ?
How can I overcome this problem?
I am simulating an engine with dynamic mesh and changing topology..
Code:
Starting time loop

Courant Number mean: 0 max: 0 velocity magnitude: 0
deltaT = 2.6455e-06
Crank angle = 0.0238095 CA-deg
CG:  Solving for motionUx, Initial residual = 0, Final residual = 0, No Iterations 0
CG:  Solving for motionUy, Initial residual = 0, Final residual = 0, No Iterations 0
CG:  Solving for motionUz, Initial residual = 0.213596, Final residual = 0.000179652, No Iterations 20
CG:  Solving for motionUx, Initial residual = 4.89248e-09, Final residual = 4.42683e-10, No Iterations 1
CG:  Solving for motionUy, Initial residual = 0, Final residual = 0, No Iterations 0
CG:  Solving for motionUz, Initial residual = 0.000100573, Final residual = 7.10585e-08, No Iterations 21
Volume: new = 48492.4 old = 48492.3 change = 0.0719435
Motion continuity errors : sum local = 1.22866e-15, maximum = 2.88108e-14
Floating point exception (core dumped)
Thanks and best regards,
Sasan.
sasanghomi is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 06:20
How to write k and epsilon before the abnormal end xiuying OpenFOAM Running, Solving & CFD 8 August 27, 2013 15:33
Convergence moving mesh lr103476 OpenFOAM Running, Solving & CFD 30 November 19, 2007 15:09
IcoFoam parallel woes msrinath80 OpenFOAM Running, Solving & CFD 9 July 22, 2007 02:58
Could anybody help me see this error and give help liugx212 OpenFOAM Running, Solving & CFD 3 January 4, 2006 19:07


All times are GMT -4. The time now is 13:42.