CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   shockTube tutorial (http://www.cfd-online.com/Forums/openfoam/115955-shocktube-tutorial.html)

gnozh April 10, 2013 04:19

shockTube tutorial
 
Hi,

I am having problems with the shockTube tutorial.

I just entered the corresponding shockTube folder, created the mesh with "blockMesh" and entered the command line "rhoCentralFoam" and then the terminal showed the following error messages:

--> FOAM Warning :
From function polyBoundaryMesh::groupPatchIDs() const
in file meshes/polyMesh/polyBoundaryMesh/polyBoundaryMesh.C at line 474
Patch empty specifies a group empty which is also a patch name. This might give problems later on.
#0 Foam::error::printStack(Foam::Ostream&) in "/opt/openfoam220/platforms/linuxGccDPOpt/lib/libOpenFOAM.so"
#1 Foam::sigFpe::sigHandler(int) in "/opt/openfoam220/platforms/linuxGccDPOpt/lib/libOpenFOAM.so"
#2 Uninterpreted:
#3 Foam::heThermo<Foam::psiThermo, Foam::pureMixture<Foam::constTransport<Foam::speci es::thermo<Foam::hConstThermo<Foam::perfectGas<Foa m::specie> >, Foam::sensibleInternalEnergy> > > >::init() in "/opt/openfoam220/platforms/linuxGccDPOpt/lib/libfluidThermophysicalModels.so"
#4 Foam::heThermo<Foam::psiThermo, Foam::pureMixture<Foam::constTransport<Foam::speci es::thermo<Foam::hConstThermo<Foam::perfectGas<Foa m::specie> >, Foam::sensibleInternalEnergy> > > >::heThermo(Foam::fvMesh const&, Foam::word const&) in "/opt/openfoam220/platforms/linuxGccDPOpt/lib/libfluidThermophysicalModels.so"
#5 Foam::psiThermo::addfvMeshConstructorToTable<Foam: :hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::constTransport<Foam::speci es::thermo<Foam::hConstThermo<Foam::perfectGas<Foa m::specie> >, Foam::sensibleInternalEnergy> > > > >::New(Foam::fvMesh const&, Foam::word const&) in "/opt/openfoam220/platforms/linuxGccDPOpt/lib/libfluidThermophysicalModels.so"
#6 Foam::autoPtr<Foam::psiThermo> Foam::basicThermo::New<Foam::psiThermo>(Foam::fvMe sh const&, Foam::word const&) in "/opt/openfoam220/platforms/linuxGccDPOpt/lib/libfluidThermophysicalModels.so"
#7 Foam::psiThermo::New(Foam::fvMesh const&, Foam::word const&) in "/opt/openfoam220/platforms/linuxGccDPOpt/lib/libfluidThermophysicalModels.so"
#8
in "/opt/openfoam220/platforms/linuxGccDPOpt/bin/rhoCentralFoam"
#9 __libc_start_main in "/lib/i386-linux-gnu/libc.so.6"
#10
in "/opt/openfoam220/platforms/linuxGccDPOpt/bin/rhoCentralFoam"

I do not understand what happened to this tutorial?

Could somebody help me?

weiwenfuxjtu September 5, 2013 08:30

Hi, have you execute the "setFields" command before the "rhoCentralFoam" ?

gnozh September 5, 2013 08:45

Quote:

Originally Posted by weiwenfuxjtu (Post 450057)
Hi, have you execute the "setFields" command before the "rhoCentralFoam" ?


Oh, I forgot "setfields"! Thanks!


All times are GMT -4. The time now is 23:47.