CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   problem in exporting stl files from solid work to openfoam (http://www.cfd-online.com/Forums/openfoam/116820-problem-exporting-stl-files-solid-work-openfoam.html)

reza1980 April 25, 2013 13:52

problem in exporting stl files from solid work to openfoam
 
1 Attachment(s)
Dear Foamers,
I would like to export CAD file from solid work to paraview as .Stl FORMAT but the arrangement will be changed .I attached the exported files.
The steps for export is like below.

How to export a .stl from Solid Works 3D CAD software


  • Tools > Options > Export
  • STL Options
  • Select Binary for file type
  • Set Quality to Fine
  • File > Save As
  • Set Save As Type to STL
  • Save

nimasam April 25, 2013 15:26

Quote:

arrangement will be changed?
whats your mean?

reza1980 April 25, 2013 17:37

I mean the propeller and the cylindrical domain are centered in CAD file but when are exported the arrangement is failed and not centered


All times are GMT -4. The time now is 05:21.