CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM

Problem regarding oscillatingFixedValue boundary condition

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 17, 2013, 04:14
Default Problem regarding oscillatingFixedValue boundary condition
  #1
New Member
 
Join Date: Apr 2013
Posts: 24
Rep Power: 4
mebinitap is on a distinguished road
Dear all,


I want to model a droplet (hemispherical) placed on a vibrating surface regarding which I used oscillatingFixedValue boundary condition for the surface (in U file) and the InterFoam solver. I again used a squared domain with atmospheric BC on all three surfaces except the horizontal one which is oscillating. However, droplet seems to blow up in volume with increase in mass (no mass addition by any means). Can anybody tell if my approach is correct? Should the solver be modified to incorporate the boundary condition?


Thanking you
mebinitap is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Radiation interface hinca CFX 15 January 26, 2014 18:11
Transient Simulation: Boundary Condition Problem Shafiul CFX 7 January 11, 2011 17:40
problem about periodic boundary condition in Fluent winnawinna FLUENT 0 December 29, 2010 00:32
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05


All times are GMT -4. The time now is 07:16.