CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM

mapFields utility

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree2Likes
  • 1 Post By openfoammaofnepo
  • 1 Post By nimasam

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 29, 2013, 16:32
Default mapFields utility
  #1
Senior Member
 
Join Date: Jan 2013
Posts: 372
Rep Power: 14
openfoammaofnepo is on a distinguished road
Dear All,

Can mapFields be used to map the results from a fine mesh to coarse mesh? For instance, from 5 million mesh to 1 million mesh? Thank you very much!
ScarFace likes this.
openfoammaofnepo is offline   Reply With Quote

Old   June 29, 2013, 16:48
Default
  #2
Senior Member
 
Nima Samkhaniani
Join Date: Sep 2009
Location: Tehran, Iran
Posts: 1,266
Blog Entries: 1
Rep Power: 24
nimasam is on a distinguished road
instead of asking you can try it
ScarFace likes this.
__________________
My Personal Website (http://nimasamkhaniani.ir/)
Telegram channel (https://t.me/cfd_foam)
nimasam is offline   Reply With Quote

Old   June 29, 2013, 17:55
Default
  #3
Senior Member
 
cfdonline2mohsen's Avatar
 
Mohsen KiaMansouri
Join Date: Jan 2010
Location: CFD Lab
Posts: 118
Rep Power: 16
cfdonline2mohsen is on a distinguished road
of course you can. just define Source & Target directories correctly.
have a look at the section 2.1.5 Increasing the mesh resolution of the user guide
__________________
“If you have an apple and I have an apple and we exchange these apples then you and I will still each have one apple. But if you have an idea and I have an idea and we exchange these ideas, then each of us will have two ideas.”
cfdonline2mohsen is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Other] Contribution a new utility: refine wall layer mesh based on yPlus field lakeat OpenFOAM Community Contributions 58 December 23, 2021 03:36
Zero Pressure with mapFields ignacio OpenFOAM Running, Solving & CFD 0 May 24, 2013 10:43
mapFields producing "nan" entry tlandfried OpenFOAM Pre-Processing 7 August 20, 2012 17:37
mapFields producing "nan" entry tlandfried OpenFOAM Pre-Processing 2 August 7, 2012 08:40
mapFields utility cristobal OpenFOAM 1 April 1, 2010 12:09


All times are GMT -4. The time now is 13:06.