transonic turbine simulation -- CFD Online Discussion Forums

July 21, 2013, 23:24	transonic turbine simulation	#1
eddykendo Member DongHo Join Date: Jul 2013 Posts: 51 Rep Power: 12	Hi, Foamers I want to simulate a single passage transonic turbine blade in 3D using a compressible solver in OpenFoam 2.1.1 or 2.2.0 I know that OpenFoam_ext 1.6 turbo had been developed for turbomachinery flows and I can use sonicSRFFoam from it for my case. By the way, it is not seemed that there is an appropriate compressible solver in OpenFoam 2.1.1 or 2.2.0 for my case. I'd like to know which a compressible solver in OpenFoam 2.1.1 or 2.2.0 could be most adequate for my case. Thank you.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Spatially and time varying inflow - turbine simulation	Alex_S	FLUENT	4	July 19, 2012 02:45
Verifying results for a wind turbine blade simulation in ANSYS CFX	Joystix	CFX	3	April 27, 2012 17:52
Sliding mesh vs MRF in axial turbine simulation	Vito	FLUENT	3	December 21, 2011 04:57
wind turbine simulation	moca	CFX	1	July 25, 2009 06:48
cfx turbine simulation	mehrdadeng	CFX	0	March 31, 2009 05:08

All times are GMT -4. The time now is 02:11.