CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   use paraview to visualize the openfoam output results (http://www.cfd-online.com/Forums/openfoam/121142-use-paraview-visualize-openfoam-output-results.html)

hz283 July 22, 2013 15:33

use paraview to visualize the openfoam output results
 
Hi All,

When I finish a parallel computation, for example 8 coes, when I would like to see the results with paraview, now I always first use the command reconstruct to combine the data and then the paraview to open them. I am wondering if there is a method to see the results using paraview without combing the data first. Because if the data are very large then the combining is very time consuming and comsume lots of space.

Thank you very much.

Bernhard July 23, 2013 01:39

Select "Decomposed Case" from Case Type, instead of Reconstructed Case"

hz283 July 23, 2013 08:18

So simple......I have not noticed this function. Thank you so much.
Quote:

Originally Posted by Bernhard (Post 441359)
Select "Decomposed Case" from Case Type, instead of Reconstructed Case"



All times are GMT -4. The time now is 11:13.