|February 14, 2014, 12:30||
Boundary Conditions for simpleFoam
Join Date: Jun 2012
Posts: 8Rep Power: 6
I'm trying to calculate permeability across a mesh using simpleFoam as the transport model. I've already received some help with a floating point error due to diverging solution but I'm wondering what the best boundary conditions to use are and how this will help my solution as it's currently still diverging (just not as quickly as it was!)
Case file can be found here:
the zmin-wall is the inlet patch and the zmax-wall is the outlet patch.
Mesh quality is ok (created in ScanIP and checkMesh says OK)
All I really want is a simple laminar flow through this mesh which I thought would be simple!
|boundary conditions, simplefoam convergence|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Impinging Jet Boundary Conditions||Anindya||Main CFD Forum||25||February 27, 2016 13:58|
|Question about heat transfer coefficient setting for CFX||Anna Tian||CFX||1||June 16, 2013 06:28|
|symmetry boundary conditions in cfx||lost.identity||CFX||41||May 22, 2013 07:21|
|boundary conditions and mesh exporting||vaina74||Open Source Meshers: Gmsh, Netgen, CGNS, ...||2||May 27, 2010 09:38|
|Trimmed cell and embedded refinement mesh conversion issues||michele||OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ...||2||July 15, 2005 04:15|