CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM

How to combine geometries?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 4, 2014, 08:57
Default How to combine geometries?
  #1
New Member
 
Alex
Join Date: Nov 2014
Posts: 4
Rep Power: 11
matzkowitzal45443 is on a distinguished road
Hello Foamers,

at he moment I'm working on my bachelor-thesis in mechanical engineering.

My project is about a childrens water play area for a science-center, where I try to reconstruct the real streaming with openFOAM as good as possible.
I'm doing a multiphase simulation (water/air) using interFoam/STLInterFoam with komegaSST.
You can imagine the geometry as a simple rectangular channel with objects like Penstocks and weirs built in it.
At the moment I got stuck and can't even find anything about my problem in literature, so i hope anyone of you guys can give me a tip

Here are some pictures of the reality-case and the Mesh:



The exhibit has very large dimensions (up to 10 meters long), but there are also very fine elements, which means, that the size of my mesh gets too big to run a simulation.
My idea was, to cut the geometry in a few pieces (with CAD / or blockMesh) and simulate each one after another. The calculated results for an overlaping block or the outlet patch schould be set as initial conditions for the following part.

The first part, ist the most complex, with Penstocks. It has about 3 million cells, the simulation works very well an stable, but i don't know how to continue...
mapFields?
Could anybody help me?
Thanks a lot!

Greetings

Alex
matzkowitzal45443 is offline   Reply With Quote

Old   December 15, 2014, 04:06
Default
  #2
Super Moderator
 
Tobi's Avatar
 
Tobias Holzmann
Join Date: Oct 2010
Location: Tussenhausen
Posts: 2,708
Blog Entries: 6
Rep Power: 51
Tobi has a spectacular aura aboutTobi has a spectacular aura aboutTobi has a spectacular aura about
Send a message via ICQ to Tobi Send a message via Skype™ to Tobi
I think is already solved
__________________
Keep foaming,
Tobias Holzmann
Tobi is offline   Reply With Quote

Reply

Tags
combine, interfoam, large geometry, multiphase

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to generate STL files for idealized geometries? werder85 Main CFD Forum 0 November 1, 2012 13:47
FSI using CT-images - need more geometries!? Liza CFX 11 August 12, 2008 10:33
mesh generator for very complex geometries? cchou2007 Main CFD Forum 3 December 8, 2007 09:37
Problems with CAD geometries Sileno Phoenics 2 August 27, 2005 11:41
Gambit - Virtual Geometries (Pro's & Con's) James Date FLUENT 3 August 11, 2003 16:46


All times are GMT -4. The time now is 07:58.