CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM

How to create a new case for a real design problem?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 25, 2015, 08:21
Default How to create a new case for a real design problem?
  #1
New Member
 
viswateja
Join Date: Jan 2015
Posts: 3
Rep Power: 2
viswateja is on a distinguished road
Hi all,

Everyone has explained how to solve the things which is already in the tutorials(i.e., cavity, elbow are already documented with the folders '0', 'constant', and 'system') Now i have a design and i want to make the document with the folders as required. please help me..
viswateja is offline   Reply With Quote

Old   January 25, 2015, 08:43
Default
  #2
Senior Member
 
Mohammad Shakil Ahmmed
Join Date: Oct 2012
Location: AU
Posts: 123
Rep Power: 5
ahmmedshakil is on a distinguished road
Please, describe your problem more elaborately if you need help from the forum (How to give enough info to get help)

Cheers
shakil
ahmmedshakil is offline   Reply With Quote

Old   January 25, 2015, 12:16
Default
  #3
New Member
 
viswateja
Join Date: Jan 2015
Posts: 3
Rep Power: 2
viswateja is on a distinguished road
Hi shakil,
For example,
Now I have designed a drawing in freecad it is related to flow of water from reservoir1 to reservoir2, both of them are structured at the top ends of a 'l_l' shaped pipe. i have placed a nozzle in the horizontal pipe(Play pipe). Now i want to simulate and want to how the flow fluid behaves.
How to create the case folders containing the '0', 'constant' and 'system' folder to run the simulation.
viswateja is offline   Reply With Quote

Old   January 26, 2015, 03:13
Default
  #4
Senior Member
 
Mohammad Shakil Ahmmed
Join Date: Oct 2012
Location: AU
Posts: 123
Rep Power: 5
ahmmedshakil is on a distinguished road
Quote:
Originally Posted by viswateja View Post
Hi shakil,
For example,
Now I have designed a drawing in freecad it is related to flow of water from reservoir1 to reservoir2, both of them are structured at the top ends of a 'l_l' shaped pipe. i have placed a nozzle in the horizontal pipe(Play pipe). Now i want to simulate and want to how the flow fluid behaves.
How to create the case folders containing the '0', 'constant' and 'system' folder to run the simulation.
you can grasp it from very fundamental tutorials, such as http://web.student.chalmers.se/group...lsLucchini.pdf

Cheers
shakil
ahmmedshakil is offline   Reply With Quote

Old   January 26, 2015, 05:38
Default
  #5
New Member
 
viswateja
Join Date: Jan 2015
Posts: 3
Rep Power: 2
viswateja is on a distinguished road
Quote:
Originally Posted by ahmmedshakil View Post
you can grasp it from very fundamental tutorials, such as http://web.student.chalmers.se/group...lsLucchini.pdf

Cheers
shakil
thanks Shakil,
nice document, went through each node of the document, found informative.
My another question is before running the $Foam_tutorials, I should make the meshing in salome or any other FEA tool, after meshing we have to save the file in UNV format, after creating the format of file at this point we have to make the supporting folders('0', 'constant', 'system') of this document so that this file will save in the tutorial folder so the corresponding case folder for this example can be created so that this can be read by OpenFOAM. How to create that case folder after meshing my drawing?
viswateja is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Non-linear equation system (DEFINE_source) Laexzzz Fluent UDF and Scheme Programming 4 February 11, 2015 17:11
view factor yoollooz Fluent UDF and Scheme Programming 0 March 1, 2013 01:44
problem to make a UDF parallel pilou Fluent UDF and Scheme Programming 0 March 9, 2011 07:35
Problem to parallelize a UDF pilou FLUENT 0 March 9, 2011 07:32
NOx UDF Abhishek Asthana FLUENT 3 June 11, 2007 05:08


All times are GMT -4. The time now is 13:08.