|
[Sponsors] |
July 3, 2015, 08:56 |
permeable patch for boundary condition
|
#1 |
New Member
Join Date: Oct 2014
Posts: 24
Rep Power: 11 |
Hi all,
I'm studying a cylinder with at bottom side a moving wall (piston) and on the top side a permeable patch that should allows the entry and the exit of air flow, following the piston law. My question is about the type of bc to use for the permeable patch on the top side. Any suggestion? Thank you in advance for your attention. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Other] Wedge patch '*' is not planar | LilumDaru | OpenFOAM Meshing & Mesh Conversion | 6 | January 12, 2021 05:55 |
Near wall treatment in k-omega SST | Arnoldinho | OpenFOAM Running, Solving & CFD | 38 | March 8, 2017 13:48 |
time varying vector boundary condition using patch normal | mpeti | OpenFOAM Running, Solving & CFD | 8 | June 21, 2012 11:50 |
velocity data as patch boundary condition | openfoam1 | OpenFOAM | 3 | January 9, 2010 18:18 |
Multicomponent fluid | Andrea | CFX | 2 | October 11, 2004 05:12 |