|
[Sponsors] |
combining flowRateInletVelocity with oscillatingFixedValue boundary conditions |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 17, 2016, 09:00 |
combining flowRateInletVelocity with oscillatingFixedValue boundary conditions
|
#1 |
Member
Robert Ong
Join Date: Aug 2010
Posts: 86
Rep Power: 15 |
Hi,
I've modified the oscillatingFV BC and it worked fine. Now, since the inlet patch is tilted (not perpendicular with the xyz coordinates), I'd prefer to use the inlet flow rate instead of uniform velocity Was wondering if there is any quick way to do this, without modifying the flowRateInletVelocity BC? Thanks and regards, Robert |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 08:38 |
Basic Nozzle-Expander Design | karmavatar | CFX | 20 | March 20, 2016 09:44 |
Problem in setting Boundary Condition | Madhatter92 | CFX | 12 | January 12, 2016 05:39 |
Question about heat transfer coefficient setting for CFX | Anna Tian | CFX | 1 | June 16, 2013 07:28 |
A problem about setting boundary conditions | lyang | Main CFD Forum | 0 | September 19, 1999 19:29 |