CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   Alive (http://www.cfd-online.com/Forums/openfoam/60891-alive.html)

Niklas Nordin (Niklas) March 2, 2005 08:46

Finally!!! The discussion
 
Finally!!!

The discussion forum is alive again.

The chalmers security group had somehow gotten the idea that the unusual amount of emails sent from this computer was because of a virus and decided to block it from the net.... without telling me I might add.

Hrvoje Jasak (Hjasak) March 2, 2005 08:49

Foam spreading like a virus -
 
Foam spreading like a virus - sounds like a compliment to me! :-)

Thanks for the effort Niklas

Mattijs Janssens (Mattijs) March 2, 2005 08:59

Hi all, we're busy setting
 
Hi all,

we're busy setting up a discussion site at CFD-Online to give Niklas' machine a rest and prevent any repeat of these problems.

We currently have a experimental phpBB board running with the same setup as this one and it will finally allow attachments! (and self-registration ;-)

We're not sure whether we can transfer any existing content but will look into it. Also probably users cannot be automatically transfered and you will have to register yourselves.

We'll keep you informed.

Mattijs

Fabian Braennstroem (Braennstroem) March 2, 2005 10:45

Hi, will the future phpBB
 
Hi,

will the future phpBB board be able to handle everything like a mail agent? I mean it would be helpfull to reply by mail with citing and direct responding to questions ...

Greetings!
Fabian

Wladimyr Mattos da Costa Dourado (Mattos) March 2, 2005 11:28

The discussion forum is alive
 
The discussion forum is alive again! It's Great!

Hi Guys!

It's a really big pleasure to hear again The OpenFoam discussion group! Congratulations for all team to recover it for our community!

And it returns in the right moment!

Tanks for all!

Wladimyr

mattijs January 17, 2007 07:41

Testing posting with email dis
 
Testing posting with email disabled.

OpenFOAM discussion board administrator January 17, 2007 11:04

Testing posting using BCC for
 
Testing posting using BCC for email notification.

OpenFOAM discussion board administrator January 17, 2007 11:48

Test message. Switched off spa
 
Test message. Switched off spam filtering to speed up mailing.

OpenFOAM discussion board administrator January 23, 2007 15:04

Test message. Switched to cron
 
Test message. Switched to cron based emailing.

OpenFOAM discussion board administrator January 23, 2007 15:21

Dear All, we switched the F
 
Dear All,

we switched the Forum board to use 'cron' based emailing. This means that posting will be much faster (the board does not have to wait until all emails have been sent) but the emails will get sent with a delay (probably a few minutes after posting)

(Test of attachment http://www.cfd-online.com/OpenFOAM_D...s/mime_txt.gif tmp.19729
)

Please let me know if there are any problems.

Mattijs

mattijs November 20, 2007 14:46

Dear all, we've had some do
 
Dear all,

we've had some downtime on the forum due to two failed disks at CFD-online. It had to be restored from backup which meant that postings between 11 and 18 November got lost.

It is probably easiest if you repost any messages that didn't get through.

Sorry for any inconvenience caused,

Mattijs


All times are GMT -4. The time now is 21:28.