Bioengineering application of Foam

msekandi1 · June 21, 2006, 11:15

Hi,

I was wondering if anyone has seen or done any arterial flow (or general blood flow) modelling with Foam. I am going to try and use Foam for this application, so I just would like to know about any cases of this usage.

Any response would be much appreciated.

Regards,

Michael

hjasak · June 21, 2006, 11:48

Lots. Have a look at the presentation by
prof. Ivankovic's group from University College Dublin and the OpenFOAM Workshop in Zagreb in January 2006. I have been collaborating with them for a number of years now and this is just a part of their work with OpenFOAM. The following link contains the presentation slides.

If you'd like to know more, please give me a shout.

Hrv

msekandi1 · June 22, 2006, 04:30

Thanks a lot for that information. I will look into his work.

Regards,

Michael

grtabor · June 22, 2006, 07:46

I'm doing quite a lot of biofluids work at the moment linking in with a tool for image-to-mesh conversion for generating patient-specific geometries (ScanIP/ScanFE from Simpleware Ltd). Unfortunately a. this is commercial rather than open source software and b. the only CFD output at the moment is to Fluent. However one of my long term aims is to rectify b. by getting an OpenFOAM mesh output module written.

Drop me a line if any of this interests you : g.r.tabor@ex.ac.uk

Gavin

June 21, 2006, 11:15	Hi, I was wondering if anyo	#1
msekandi1 New Member Michael Sekandi Join Date: Mar 2009 Location: London, UK Posts: 5 Rep Power: 17	Hi, I was wondering if anyone has seen or done any arterial flow (or general blood flow) modelling with Foam. I am going to try and use Foam for this application, so I just would like to know about any cases of this usage. Any response would be much appreciated. Regards, Michael

June 21, 2006, 11:48	Lots. Have a look at the pres	#2
hjasak Senior Member Hrvoje Jasak Join Date: Mar 2009 Location: London, England Posts: 1,905 Rep Power: 33	Lots. Have a look at the presentation by prof. Ivankovic's group from University College Dublin and the OpenFOAM Workshop in Zagreb in January 2006. I have been collaborating with them for a number of years now and this is just a part of their work with OpenFOAM. The following link contains the presentation slides. If you'd like to know more, please give me a shout. Hrv __________________ Hrvoje Jasak Providing commercial FOAM/OpenFOAM and CFD Consulting: http://wikki.co.uk

June 22, 2006, 04:30	Thanks a lot for that informat	#3
msekandi1 New Member Michael Sekandi Join Date: Mar 2009 Location: London, UK Posts: 5 Rep Power: 17	Thanks a lot for that information. I will look into his work. Regards, Michael

June 22, 2006, 07:46	I'm doing quite a lot of biofl	#4
grtabor Senior Member Gavin Tabor Join Date: Mar 2009 Posts: 181 Rep Power: 17	I'm doing quite a lot of biofluids work at the moment linking in with a tool for image-to-mesh conversion for generating patient-specific geometries (ScanIP/ScanFE from Simpleware Ltd). Unfortunately a. this is commercial rather than open source software and b. the only CFD output at the moment is to Fluent. However one of my long term aims is to rectify b. by getting an OpenFOAM mesh output module written. Drop me a line if any of this interests you : g.r.tabor@ex.ac.uk Gavin

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
y+ application	vivek.k.yakkundi	FLUENT	2	October 22, 2007 12:17
Which application to use	ploceus	OpenFOAM Running, Solving & CFD	1	December 7, 2005 19:41
application of CFD	REKHA	FLUENT	1	January 13, 2005 01:25
application of cfd	samuel R devadoss	Main CFD Forum	0	March 15, 2004 04:38
PER & MIR application	dimitris	Main CFD Forum	1	January 14, 2001 05:10