CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   A free surface problem (http://www.cfd-online.com/Forums/openfoam/63998-free-surface-problem.html)

crammer008 April 26, 2009 23:30

A free surface problem
 
Dear all,

I am a newbie. I'd like to simulate the following simple case. Would you please tell me where I can find a similar tutorial case to learn the modelling.

The tested case is a 2D rectangular tank which is partially filled with water and will move with a sinusoidal signal. The measured data is the pressure response at a certain point and free-surface elevation at a certain vertical position. A laminar model is preferred for the case.

Many thanks!
Crammer008

kwardle April 27, 2009 09:33

Take a look at interDyMFoam, this should be what you need. There are several tutorials available for sloshing tanks as well to help you get started.

crammer008 April 27, 2009 21:41

Dear Kwardle,

Thanks a lot for your great help:)

Best regards,
LUO Chao


All times are GMT -4. The time now is 19:36.