CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   Problems with LRR in simpleFoam (http://www.cfd-online.com/Forums/openfoam/64008-problems-lrr-simplefoam.html)

erge April 27, 2009 05:49

Problems with LRR in simpleFoam
 
I'm trying to run a 3D simulation using the LRR turbulence model. The problem is that the simulation doesn't converge. I've tried the method described here but that doesn't work. What should be the proper boundary conditions for R?
Can this problem be related to the y+ value? The mesh that i am using have an y+ value around 2.

//Eric


All times are GMT -4. The time now is 05:34.