CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   movingConeMotion with "Floating point exception" crashed!! (http://www.cfd-online.com/Forums/openfoam/65686-movingconemotion-floating-point-exception-crashed.html)

quinton June 23, 2009 06:52

movingConeMotion with "Floating point exception" crashed!!
 
hi,

i just compile the "setMotionMovingCone.C", everything is ok!
when i run icoDyMFoam, the errors like this:

Selecting dynamicFvMesh dynamicMotionSolverFvMesh
Selecting motion solver: laplaceFaceDecomposition
Selecting motion diffusivity: file
Reading transportProperties

Reading field p

Reading field U

Reading/calculating face flux field phi

Reading field rAU if present


Starting time loop

Volume: new = 1.73779e-09 old = 1.73779e-09 change = 0 ratio = 0
Courant Number mean: 0 max: 0.3 velocity magnitude: 1
Time = 5e-06

Floating point exception

what should i do!?

thanks

best regards!

henrik September 3, 2009 19:56

Dear Quinton,

this issue is fixed in revision 1421.

Best Regards, Henrik


All times are GMT -4. The time now is 21:16.