paraFoam / paraview black screen

gfilip · May 11, 2009, 16:02

Hello,

I received a seg. fault while running paraview and ever since whenever I try to open a case, the main view is blank and all black. There are no errors in the terminal window. I've tried to reset the camera and other settings in paraview but so far no luck.

Any ideas?

Thanks

hellorishi · May 12, 2009, 11:59

One workaround is to use the binary from this website.
http://paraview.org/paraview/resources/software.html

Download and extract the binary somewhere. Then add the path to that directory in your PATH variable in bashrc or tcshrc file.

You will not be able to use paraFoam. Instead foamToVTK can be used to get data in VTK format. (This typically consumes double the space on harddisk, due to duplication of data).

kjetil · July 7, 2009, 18:04

I would also like to know if there is any clever fix to this apart from downloading a new version. I don't understand why this shouldn't work? Also, when exiting paraFoam, my terminal outputs:

Code:

Mesa 7.4 implementation error: Unable to delete texture, no context
Please report at bugzilla.freedesktop.org

... would that give any hints in what to do to solve this?

gfilip · July 10, 2009, 05:14

hello kjetil,

i ended figuring out a way of solving this blank screen problem without upgrading. when i load a case with a blank screen, i simply close the main display window, with the X in the upper right corner, and choose either 2D or 3D, i forget which one and cant check as i am unable to access paraview. try either one of those, and hopefully itll work.

regards

-greg

kjetil · July 12, 2009, 13:57

This is a mystery.. thanks greg, but no - that either didn't work.

I then downloaded latest version from the CVS base, moved the original ParaView3.3-csv to ParaView3.3-csv-old, and moved my new CVS to use ParaView3.3-csv instead. The compiled this new paraview and the PV3-reader, it now claims to be version 3.7.0 (development), but still - it doesn't work! And what happens is ... the moment I click Apply to view the mesh/surface, the center axis disappears - and of course no geometry is seen either.

I think I even compiled a new set of Mesa drivers - version 7.4.4 - and the previous error message disappeared. But again, still no geometry.

Any clues anyone?

I'm running Ubuntu 9.04 64bit on a quad core cpu. And I compiled paraview with a "new" Qt, commenting out the error message instead of using an old Qt.

CapSizer · July 13, 2009, 02:01

From your description I don't think this is your problem, but the problem I ran into sounded somewhat similar. The solution (this on Ubuntu) in my case was to turn off the funky desktop effects, things like transparant and flexible windows etc., which were messing with OpenGL.

kjetil · July 13, 2009, 04:30

Thanks Charles.
I am sure desktop effects are turned off too ... maybe I'll have to send a request to the paraView guys instead.

May 11, 2009, 16:02	paraFoam / paraview black screen	#1
gfilip Member Join Date: May 2009 Posts: 54 Rep Power: 16	Hello, I received a seg. fault while running paraview and ever since whenever I try to open a case, the main view is blank and all black. There are no errors in the terminal window. I've tried to reset the camera and other settings in paraview but so far no luck. Any ideas? Thanks

July 7, 2009, 18:04		#3
kjetil Senior Member Join Date: Mar 2009 Location: Norway Posts: 137 Rep Power: 17	I would also like to know if there is any clever fix to this apart from downloading a new version. I don't understand why this shouldn't work? Also, when exiting paraFoam, my terminal outputs: Code: Mesa 7.4 implementation error: Unable to delete texture, no context Please report at bugzilla.freedesktop.org ... would that give any hints in what to do to solve this?

July 13, 2009, 02:01	Turn off the funky desktop effects	#6
CapSizer Senior Member Charles Join Date: Apr 2009 Posts: 185 Rep Power: 18	From your description I don't think this is your problem, but the problem I ran into sounded somewhat similar. The solution (this on Ubuntu) in my case was to turn off the funky desktop effects, things like transparant and flexible windows etc., which were messing with OpenGL.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Monitor Screen Resolution and ParaView	kenhelland	OpenFOAM Installation	1	December 7, 2008 13:07
[OpenFOAM] Both paraview and paraFoam crash on Redhat Linux WS v4 64bit	sek	ParaView	4	August 17, 2006 16:26
[OpenFOAM] ParaFoam conflicting version of paraview	xponticq	ParaView	3	May 16, 2006 12:52
[OpenFOAM] Building Paraview with reader builtin instead of parafoam script	tj22	ParaView	2	April 7, 2006 12:55
Problem running paraFoam paraview command not found	spdracer22	OpenFOAM Pre-Processing	2	December 7, 2005 05:32

May 12, 2009, 11:59		#2
hellorishi Senior Member Rishi . Join Date: Mar 2009 Posts: 149 Rep Power: 17	One workaround is to use the binary from this website. http://paraview.org/paraview/resources/software.html Download and extract the binary somewhere. Then add the path to that directory in your PATH variable in bashrc or tcshrc file. You will not be able to use paraFoam. Instead foamToVTK can be used to get data in VTK format. (This typically consumes double the space on harddisk, due to duplication of data).

July 10, 2009, 05:14		#4
gfilip Member Join Date: May 2009 Posts: 54 Rep Power: 16	hello kjetil, i ended figuring out a way of solving this blank screen problem without upgrading. when i load a case with a blank screen, i simply close the main display window, with the X in the upper right corner, and choose either 2D or 3D, i forget which one and cant check as i am unable to access paraview. try either one of those, and hopefully itll work. regards -greg

July 12, 2009, 13:57		#5
kjetil Senior Member Join Date: Mar 2009 Location: Norway Posts: 137 Rep Power: 17	This is a mystery.. thanks greg, but no - that either didn't work. I then downloaded latest version from the CVS base, moved the original ParaView3.3-csv to ParaView3.3-csv-old, and moved my new CVS to use ParaView3.3-csv instead. The compiled this new paraview and the PV3-reader, it now claims to be version 3.7.0 (development), but still - it doesn't work! And what happens is ... the moment I click Apply to view the mesh/surface, the center axis disappears - and of course no geometry is seen either. I think I even compiled a new set of Mesa drivers - version 7.4.4 - and the previous error message disappeared. But again, still no geometry. Any clues anyone? I'm running Ubuntu 9.04 64bit on a quad core cpu. And I compiled paraview with a "new" Qt, commenting out the error message instead of using an old Qt.

July 13, 2009, 04:30		#7
kjetil Senior Member Join Date: Mar 2009 Location: Norway Posts: 137 Rep Power: 17	Thanks Charles. I am sure desktop effects are turned off too ... maybe I'll have to send a request to the paraView guys instead.