question on reactionFoam

leejc · July 15, 2009, 16:50

I have just started with OpenFoam and am trying to test it out with a mixing problem (two streams: air and a gas into a chamber with one exit plane in the turbulent regime RAN is fine). Is there an existing solver that can handle this?

Many thanks in advance.

markusrehm · July 16, 2009, 02:38

Hi,

have a look here
http://www.tfd.chalmers.se/~hani/kur...actingFoam.pdf

and here
http://openfoamwiki.net/index.php/Tu..._firstTutorial

Markus

leejc · July 16, 2009, 14:57

Thank you very much for the quick response.

I tried to run the reactingFoam turorial with OpenFoam 1.5 and it conplains that the a file RASProperties is missing in the constant director. Does anyon know what this file should be?

leejc · July 16, 2009, 15:02

Please ignore my previous message. I found RASProperties.. file containing spec. for the turbulence model..

Thank you Markus

July 15, 2009, 16:50	question on reactionFoam	#1
leejc New Member Jerry Lee Join Date: Jul 2009 Posts: 17 Rep Power: 16	I have just started with OpenFoam and am trying to test it out with a mixing problem (two streams: air and a gas into a chamber with one exit plane in the turbulent regime RAN is fine). Is there an existing solver that can handle this? Many thanks in advance.

July 16, 2009, 14:57	problem.. missing file	#3
leejc New Member Jerry Lee Join Date: Jul 2009 Posts: 17 Rep Power: 16	Thank you very much for the quick response. I tried to run the reactingFoam turorial with OpenFoam 1.5 and it conplains that the a file RASProperties is missing in the constant director. Does anyon know what this file should be?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unanswered question	niklas	OpenFOAM	2	July 31, 2013 16:03
question about implementing boundary conditions	saygin	Main CFD Forum	0	July 6, 2006 07:08
Poisson Solver question	Suresh	Main CFD Forum	3	August 12, 2005 04:37
CHANNEL FLOW: a question and a request	Carlos	Main CFD Forum	4	August 23, 2002 05:55
question	K.L.Huang	Siemens	1	March 29, 2000 04:57

July 16, 2009, 02:38		#2
markusrehm Senior Member Markus Rehm Join Date: Mar 2009 Location: Erlangen (Germany) Posts: 184 Rep Power: 17	Hi, have a look here http://www.tfd.chalmers.se/~hani/kur...actingFoam.pdf and here http://openfoamwiki.net/index.php/Tu..._firstTutorial Markus

July 16, 2009, 15:02		#4
leejc New Member Jerry Lee Join Date: Jul 2009 Posts: 17 Rep Power: 16	Please ignore my previous message. I found RASProperties.. file containing spec. for the turbulence model.. Thank you Markus