the new viscoelastic Modell in openFOAM1.5-dev

Tajoooko · August 8, 2009, 07:01

hello

i just finde that in the new openfoam1.5-dev version there is a new visoelastic modell that is done by (J OVANI L UIZ FAVERO from U NIVERSIDADE F EDERAL DO R IO G RANDE DO S UL)

so i would like to work with it

and the next step i do

1. i take-copy the file called viscoelastic and the data Allmake (from the new version OpenFOAM1.5-dev)

2. i add thes files to my (about 2 or tow months older openfoam1.5-dev) and then after adding that in the src/transportmodell ..... at the same place where i take it from

and then i take a shell and wirte ./Allmake

is that enogh and ok??

how can i use them with the simplefoam solver?

gschaider · August 10, 2009, 15:51

Quote:

Originally Posted by Tajoooko

hello

i just finde that in the new openfoam1.5-dev version there is a new visoelastic modell that is done by (J OVANI L UIZ FAVERO from U NIVERSIDADE F EDERAL DO R IO G RANDE DO S UL)

so i would like to work with it

and the next step i do

1. i take-copy the file called viscoelastic and the data Allmake (from the new version OpenFOAM1.5-dev)

2. i add thes files to my (about 2 or tow months older openfoam1.5-dev) and then after adding that in the src/transportmodell ..... at the same place where i take it from

and then i take a shell and wirte ./Allmake

is that enogh and ok??

how can i use them with the simplefoam solver?

If you got the 1.5-dev via SVN in the first place, then the easiest way to get all the new stuff is by saying "svn update" in the OpenFOAM-1.5-dev-directory. Everything new will be pulled from the server. Of course you'll have to recompile your installation.

There is a special solver for viscoelastic flow, but don't ask me about the name (I don'T know)

Bernhard

henrik · August 10, 2009, 16:36

Dear Tajoooko,

the solver lives here:

/home/foam/OpenFOAM/openfoam-extend/applications/solvers/viscoelastic

Jovanni and the viscoelastic people meet here:

Viscoelastic Fluid Flows using OpenFOAM The solver viscoelasticFluidFoam

Henrik

Tajoooko · August 11, 2009, 01:57

thank you gschaider and henrik

i will try and let you know

Tajoooko · August 12, 2009, 02:12

jeh i just copy the solver in my older openfoam1.5-dev and run ./Allmake

that was enogh with that what i have don in the first post, i then try the tutorials and they work,

thank you

sanjibdsharma · December 17, 2009, 02:23

Hi,

I saw a few notes on VOF-Viscoelastic / Viscoelastic model implemented in OpenFOAM. However, the released versions do not have this solver. Can you give a link from where I can download this solver? Also, let me know how to compile this with OpenFOAM-1.6

Thanks a lot,

Sanjib

elvis · December 17, 2009, 10:53

https://openfoam-extend.svn.sourcefo...nFOAM-1.5-dev/ take a look what you find all in the dev version

svn co https://openfoam-extend.svn.sourcefo.../viscoelastic/
and
svn co https://openfoam-extend.svn.sourcefo...sticFluidFoam/
just to get the viscoelastic stuff. Make sure you have the nescessary SVN packages installed!

look for http://www.cfd-online.com/Forums/members/jovani.html
better http://www.cfd-online.com/Forums/sea...induser&u=2150 and read on the answers jovani gave compiling 1.6

Maybe it is best to take 1.5-dev (but you have to compile from scratch but it is worth the work!)

elvis

August 8, 2009, 07:01	the new viscoelastic Modell in openFOAM1.5-dev	#1
Tajoooko Member Join Date: Jul 2009 Posts: 63 Rep Power: 5	hello i just finde that in the new openfoam1.5-dev version there is a new visoelastic modell that is done by (J OVANI L UIZ FAVERO from U NIVERSIDADE F EDERAL DO R IO G RANDE DO S UL) so i would like to work with it and the next step i do 1. i take-copy the file called viscoelastic and the data Allmake (from the new version OpenFOAM1.5-dev) 2. i add thes files to my (about 2 or tow months older openfoam1.5-dev) and then after adding that in the src/transportmodell ..... at the same place where i take it from and then i take a shell and wirte ./Allmake is that enogh and ok?? how can i use them with the simplefoam solver?

December 17, 2009, 02:23	VOF-Viscoelastic Model	#6
sanjibdsharma New Member Sanjib Das Sharma Join Date: May 2009 Posts: 22 Rep Power: 6	Hi, I saw a few notes on VOF-Viscoelastic / Viscoelastic model implemented in OpenFOAM. However, the released versions do not have this solver. Can you give a link from where I can download this solver? Also, let me know how to compile this with OpenFOAM-1.6 Thanks a lot, Sanjib

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with new viscosity modell	Mikro	OpenFOAM Running, Solving & CFD	2	April 1, 2009 08:21
Viscoelastic flow modeling in rotorstator system	vulda	OpenFOAM Running, Solving & CFD	3	July 12, 2008 03:16
Viscoelastic flow in rotor-stator @ POLYFLOW	Sumeshen	FLUENT	0	March 31, 2008 08:59
Viscoelastic flow in rotor-stator @ POLYFLOW	Sumeshen	Main CFD Forum	0	March 26, 2008 11:52
Viscoelastic flow in rotor-stator @ POLYFLOW	Sumeshen	FLUENT	0	March 26, 2008 11:51

August 10, 2009, 16:36		#3
henrik Senior Member Henrik Rusche Join Date: Mar 2009 Location: Braunschweig, Niedersachsen, Germany Posts: 262 Rep Power: 7	Dear Tajoooko, the solver lives here: /home/foam/OpenFOAM/openfoam-extend/applications/solvers/viscoelastic Jovanni and the viscoelastic people meet here: Viscoelastic Fluid Flows using OpenFOAM The solver viscoelasticFluidFoam Henrik

August 11, 2009, 01:57		#4
Tajoooko Member Join Date: Jul 2009 Posts: 63 Rep Power: 5	thank you gschaider and henrik i will try and let you know

August 12, 2009, 02:12		#5
Tajoooko Member Join Date: Jul 2009 Posts: 63 Rep Power: 5	jeh i just copy the solver in my older openfoam1.5-dev and run ./Allmake that was enogh with that what i have don in the first post, i then try the tutorials and they work, thank you

December 17, 2009, 10:53		#7
elvis Senior Member Elvis Join Date: Mar 2009 Location: Sindelfingen, Germany Posts: 410 Blog Entries: 4 Rep Power: 11	https://openfoam-extend.svn.sourcefo...nFOAM-1.5-dev/ take a look what you find all in the dev version svn co https://openfoam-extend.svn.sourcefo.../viscoelastic/ and svn co https://openfoam-extend.svn.sourcefo...sticFluidFoam/ just to get the viscoelastic stuff. Make sure you have the nescessary SVN packages installed! look for http://www.cfd-online.com/Forums/members/jovani.html better http://www.cfd-online.com/Forums/sea...induser&u=2150 and read on the answers jovani gave compiling 1.6 Maybe it is best to take 1.5-dev (but you have to compile from scratch but it is worth the work!) elvis